Alpina AS 56 P WS 210 petrol engine snow blower
Circulators and Pumps
There are 139 products.
Pedrollo electric pump with peripheral impeller PKm 60 cod. 41PNK60A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos wastewater pump Unilift CC5-A1 Cod. 96280966
Useful to
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It features a dual outlet, allowing for easy retrofitting to existing piping.
Pedrollo electric pump with peripheral impeller PKm 60 MD cod. 41PNK63A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos wastewater pump Unilift CC5-M1 Cod. 96280965
Useful to
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It features a dual outlet, allowing for easy retrofitting to existing piping.
Pedrollo electric pump with peripheral impeller PKm 65 cod. 41PNK67A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos wastewater pump Unilift CC7-A1 Cod. 96280968
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It features a dual outlet, allowing for easy retrofitting to existing piping.
Pedrollo electric pump with peripheral impeller PKm 80 cod. 41PM81A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos wastewater pump Unilift CC7-M1 Cod. 96280967
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It features a dual outlet, allowing for easy retrofitting to existing piping.
Pedrollo electric pump with peripheral impeller PKm 90 cod. 41PM901A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos wastewater pump Unilift CC9-A1 Cod. 96280970
Useful to:
Wastewater - Commercial buildings
Domestic wastewater
Industrial waste water
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It features a dual outlet, allowing for easy retrofitting to existing piping.
Pedrollo electric pump with peripheral impeller PKm 100 cod. 41PM9117A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos vertical centrifugal pump CR 1S-25 FGJ cod. 96531735
Vertical multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are made of cast iron. All other parts in contact with liquids are in stainless steel (EN 1.4301).
Grundfos submersible wastewater pump Unilift CC9-M1
Useful to:
Wastewater - Commercial Buildings
Domestic wastewater
Industrial wastewater
The UNILIFT CC model is a single-stage submersible pump designed for pumping clean, non-aggressive water and gray water up to a level of 3 mm. It is equipped with a double outlet, allowing easy adaptation to existing pipes.
Pedrollo electric pump with peripheral impeller PKm 200 cod. 41PM9217A1
Liquid type: Clean water
Uses: domestic
Uses: irrigation, water supply, pressure boosting systems
Typology: surface
Family: peripherals
Grundfos three-phase vertical centrifugal pump CR 1S-2 A cod. 96515537
Vertical multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are made of cast iron. All other parts in contact with liquids are in stainless steel (EN 1.4301).