Claber Underground Irrigation: The Perfect DIY Lawn

Colibrì System: The Easy-to-Underground System for Everyone

Problem: You'd like underground irrigation but you're worried about the water pressure from your tap being too low, and you don't want to spend money on an additional pump or deep digging.

Solution: The Claber Colibrì System is the only pop-up micro-sprinkler that operates at low pressure (1.5 bar). It's easy to install with a 1/2" main hose (the same as garden hoses), requires little digging, and uses very little water. It's the perfect system for DIY urban gardens.

Static or Dynamic Sprinklers?

If you have a large garden or need more power, switch to the Claber professional line:
🔹 Static: They don't move. They create a fixed umbrella jet. Ideal for small areas, corners, or narrow lawns (3-5 meter radius).
🔹 Dynamic (Turbine): They rotate silently, distributing water over a long distance. Ideal for large open areas (radius 5-10+ meters).

Frequently Asked Questions about Claber Underground Irrigation

1. Can I connect the Colibrì System to a faucet timer?

Yes! This is the great convenience of the Colibrì. You don't need expensive underground solenoid valves. You can connect the beginning of the line directly to an Aquauno or Aquadue battery-powered water timer attached to your home faucet, making installation a breeze.

2. How do I adjust the angle of the sprinklers?

Claber sprinklers (both static and dynamic) are almost all adjustable . By lifting the head (with the appropriate key or by hand), you can open or close the operating arc (e.g. from 0° to 360°) to water only the lawn and not the sidewalk or walls of the house.

3. What pipe should I use for the basement?

For the Colibrì System, a 1/2" (13-16 mm) header pipe is used. For systems with standard sprinklers (static/dynamic), it is best to use a 25 mm or 32 mm polyethylene pipe (PN6 or PN10) to ensure sufficient flow and pressure for all the sprinklers in the line.