Grundfos vertical centrifugal pump CR 1S-25 FGJ cod. 96531735
Grundfos vertical centrifugal pump CR 1S-25 FGJ cod. 96531735
Vertical multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are made of cast iron. All other parts in contact with liquids are in stainless steel (EN 1.4301).
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Grundfos vertical centrifugal pump CR 1S-25 FGJ cod. 96531735
Model: CR 1S-25 A-FGJ-AE-HQQE
Vertical centrifugal pump, multi-stage with suction and delivery ports on the same level (in line). The pump head and base are made of cast iron - all other parts in contact with the liquid are made of stainless steel. Power transmission occurs via rigid coupling. The connection to the piping is via a combination of DIN-ANSI-JIS flanges. The pump is equipped with a 1-phase, air-cooled asynchronous motor, mounted on support feet.
Useful to:
- Air Conditioning - Commercial Buildings
- Heating in commercial buildings
- Pressure increase - Commercial buildings
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Cooling down
- Desalination
- Industrial heating
- Processing
- Process liquid transfer
- Industrial process water treatment
- Washing and cleaning
- Industrial water supply
- Industrial wastewater
- Solar plumbing solutions
- Capture of surface water
- Community water supply
- Water distribution
| TECHNIQUES | |
|---|---|
| Pump speed on which the data is based | 2759 rpm |
| Nominal flow rate | 0.9 m³/h |
| Prevalence | 103.8 m |
| Max. head | 142.9 m |
| Stadiums | 25 |
| Impellers | 25 |
| No. of impellers with reduced diameter | 0 |
| Low NPSH | No |
| Pump orientation | Vertical |
| Shaft sealing system | Single |
| Code for shaft seal | HHQE |
| Approvals | CE, EAC, UKCA, SEPRO |
| Drinking water approvals | WRAS, ACS |
| Curve tolerance | ISO9906:2012 3B |
| Pump version | TO |
| Model | TO |
| MATERIALS | |
|---|---|
| Body Pump | Cast iron, EN1561 EN-GJL-200 ASM A48-25B |
| Impeller | Stainless steel, EN 1.4301, AISI 304 |
| Material code | TO |
| Code for rubber | AND |
| Bearing | SIC |
| INSTALLATION | |
|---|---|
| Max ambient temperature | 40°C |
| Max operating pressure | 25 bars |
| Max pressure at the mentioned temperature | 25 bar / 120°C - 25 bar / -20°C |
| Connection type | DIN / ANSI / JIS |
| Suction size | DN 25/32 |
| Delivery size | DN 25/32 |
| Nominal pressure of the connection | PN 25 |
| Flange classification input | 250 lbs |
| Flange dimensions for the motor | FT100 |
| Pump connection code | FGJ |
| LIQUID | |
|---|---|
| Pumped liquid | Waterfall |
| Liquid temperature range | -20 .. 120°C |
| Liquid temperature during operation | 20°C |
| Density | 998.2 kg/m³ |
| ELECTRICAL DATA | |
|---|---|
| Standard engine | IEC |
| Structure dimensions | 80B |
| IE efficiency code | IE1 |
| Rated power - P2 | 0.75 kW |
| Power (P2) required by the pump | 0.75 kW |
| Network frequency | 50Hz |
| Nominal tension | 1 x 220-230/240V |
| Rated current | 5.10/4.75 A |
| Starting current | 300% |
| Cos phi - power factor | 0.99 |
| Nominal speed | 2780 rpm |
| Efficiency | IE1 72.1% |
| Engine efficiency at full load | 72.1% |
| No. of poles | 2 |
| Protection class (IEC 34-5) | 55 Dust/Jetting |
| Insulation class (IEC 85) | F |
| Integrated motor protection | PTO |
| Engine code | 85900108 |
| OTHER | |
|---|---|
| Frequency converter | IT IS NOT |
| Terminal block position | 6 |
| Minimum efficiency index, MEI ≥ | 0.54 |
| Net weight | 35.6kg |
| Gross weight | 38.5kg |
| Packaging volume | 0.13 m³ |
| Nation of origin | HU |
| Agreement rate no. | 84137075 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included