Alpina AS 56 P WS 210 petrol engine snow blower
Hardware
There are 107 products.
Arexons black silicone gasket 200 ml cod. 0099
Gasket for sealing the engine oil sump, dynamic joints, water pumps, differentials, gearboxes and wherever a pre-formed gasket needs to be replaced. Replaces all cork, felt, paper, silicone, rubber, etc. gaskets of any size. It resists temperatures from -50°C to +180°C with peaks of 250°C for limited periods, water, mineral and synthetic oils, LPG, diesel, radiator fluids. Does not adhere to PE, PP, PTFE, bituminous surfaces.
Arexons System 35A10 dense worktop sealant 100 ml cod. 4734
Arexons motorblack black silicone gasket 60 gr code 0094
Features in a nutshell:
specific product for sealing the oil sump of "Fire" engines.
sealant for moving machine parts.
Suitable for high temperatures.
resists water, fuels *, mineral and synthetic oils, radiator fluids.
* Petrol: it only resists vapors, on the other hand it has poor resistance in immersion.
Arexons System 35A73 top sealant 250 ml cod. 4736
Arexons motorsild original red silicone gasket 60 gr cod. 0096
Features in a nutshell:
In replacement or as an adjuvant of any type of preformed gasket.
Low volatility product
Easy to remove.
Resistant to water, fuels *, mineral and synthetic oils, radiator fluids.
* Petrol: it only resists vapors, on the other hand it has poor resistance in immersion.
Arexons System strong threadlocker 200°C 50 ml cod. 4745
Arexons oximix pro black silicone gasket 100 ml cod. 0078
Black oxime cross-linking silicone gasket ideal for sealing mechanical components in both the automotive and industrial sectors (pump gaskets, intake manifolds, valve and thermostat covers, hydraulic circuits, transmissions, etc.). Resists oils, including synthetic ones, water, coolants.
Arexon System 52A90 penetrating 50 ml cod. 4721
Arexons pik liquid seal 65 ml cod. 0012
Product for sealing gaskets based on natural rubber, solvent, plasticizer and fillers. It is able to fill micro-spaces due to imperfect flatness, replacing all types of pre-formed gaskets. Soft, non-self-levelling paste, beige in colour, based on a special natural resin. It turns into a solid gasket after evaporation of the solvent.
Liquid gasket for sealing engine couplings, machine tools, hydraulic pipe fittings, liquid gas containers. Resists water, mineral oils, fuels, methane, diluted acids, lubricating greases and liquid gas. Temperature range: -20°C to +110°C.
Arexons System 56A20 high performance blocker 200°C 50 ml cod. 4748
Arexons black silicone gasket seal 5552 ml 70 cod. 0075
Features in a nutshell:
In replacement or as an adjuvant of any type of preformed gasket.
Easy to remove
The product is resistant to water, fuels *, mineral and synthetic oils, radiator fluids.
* Petrol: it only resists vapors, on the other hand it has poor resistance in immersion.
Arexons seal 5661 white silicone gasket 60 ml cod. 0076
Silicone gasket to be used in replacement or as an adjuvant of any type of preformed sealing gasket for mechanical, thermomechanical, chemical, electronic, electromechanical couplings that operate in particularly difficult conditions. Single-component acetic-type elastomer. Vulcanize at room temperature. Thixotropic, does not drip. Excellent resistance to oils and high temperatures. High mechanical properties: hardness, resistance to breakage and compression, etc. Excellent resistance to climatic aging. High degree of vibration absorption. Operating temperature: from -70°C to +250°C with peaks up to +300°C. Does not damage catalytic converter sensors.
Arexons System AN251 copper anti-seize 500 gr cod. 4251
Arexons green sealant 100 ml code 0090
Anaerobic gasket, polymerizes in the absence of air after approximately 45 minutes. Replaces pre-formed gaskets for sealing flat parts. Forms an elastic film. Allows easy disassembly of parts. Very thin thicknesses can be obtained. Resists oils, petrol, coolants. Operating temperature: -55°C to +150°C.
Arexons System AP724 rapid primer 200 ml cod. 4725