Arexons System 35A10 dense worktop sealant 100 ml cod. 4734
Arexons System 35A10 dense worktop sealant 100 ml cod. 4734
To seal connections of flat surfaces even if not perfectly machined. Specific for sealing gear boxes, gearboxes, differentials, pumps, reducers, flanges in general.
Arexons System 35A10 dense worktop sealant 100 ml cod. 4734
To seal connections of flat surfaces even if not perfectly machined. Specific for sealing gear boxes, gearboxes, differentials, pumps, reducers, flanges in general. High thixotropy: no migration of the product during application. It does not present the settling phenomena typical of traditional gaskets, ensuring correct metal-to-metal contact over time. Resists vibrations and temperature changes. High resistance and seal against water, vapours, oils, gases, fuels, LPG, chemical agents in general. Easy disassembly of the joint. Tested to ASTM D-1002, ASTM D-2095 and ASTM D-905 standards. Operating temperature: from -55°C to +200°C. Maximum diametric clearance: 0.50 mm. Storage duration at room temperature: 18 months minimum.
DESCRIPTION
Suitable for coupling flat surfaces with a max play of 0.50 mm.
Disassembly is possible with normal tools. Self-modelling product, it eliminates the problem of storing traditional gaskets of all shapes and sizes, replacing their use on rigid joints, even on surfaces that are not perfectly machined.
The high thixotropy prevents the treated surfaces from dripping and allows application without waste.
It guarantees a perfect watertight seal.
It protects the treated parts from corrosion and prevents any loosening caused by vibrations.
It does not create obstructions in micro passages and does not contaminate hydraulic or pneumatic circuits.
The anaerobic characteristic, i.e. the fluid state in the presence of air, allows for easy removal of the excess product outside the joint.
Visible under Wood's black light.
USE
Recommended for sealing gears, gearboxes, differentials, pumps, reducers, flanges in general.
CLASSIFICATION
Product tested according to ASTM Standards:
D-1002, D 2095.
USE
The product is suitable for use on metal surfaces.
Clean and degrease the surfaces with acetone.
Apply the product in sufficient quantities to completely fill the joint.
Assemble normally and wait for curing.
WARNINGS
This product is not normally recommended for use with plastic materials, where stress cracking is possible.
Contact our technical service for prior confirmation of compatibility.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included