Bravocab 1"M 17 liter cabinet water softener patents with by-pass
Well done CAB
Water softener composed of a polypropylene cabinet, resin containment cylinder in glass fiber reinforced polypropylene, strong cationic resin with sodium cycle, electronic control valve with daily statistical management of actual consumption - dissolution and use of only the salt necessary for regeneration - countercurrent volumetric regeneration - complete with by-pass, hardness calibrator, hardness analysis kit - ambient temperature: min/max 5/40 °C - water temperature: min/max 5/30 °C - operating pressure: min/max 1.5/9 Bar.
BRAVOCAB 17 lt
Code: CB10417
Monobloc ion exchange cabinet electronic automatic water softener suitable for water treatment
intended for human consumption with proportional volumetric regeneration in countercurrent. BravoCAB is in
able to use resins with different regenerative levels, based on automatically detected consumption
from electronics. In this way it adapts to the customer's needs (holidays, guests, seasonality) guaranteeing
salt and water consumption up to 50% lower than traditional valves. Furthermore, the innovative system
counter-current regeneration allows the complete restoration of the exchange capacity at each cycle
regenerative. The salt vat works dry, preventing the formation of salt bridges and facilitating the
maintenance. The innovative electronics allow quick programming (just set the time
and the hardness value) and has an electronic self-diagnosis system with display of the days
of operation, total number of regenerations, turbine control and micro-switch control. Statistical data and
programming are maintained even in the event of a power failure. The standard display shows: time,
hardness and regeneration time. Volume resin regeneration system with the possibility of forcing
timed cycle. Programmable regeneration time. BravoCAB is complete with cabin
polypropylene, reinforced polypropylene cylinder, electronic volume control valve with forcing,
strong cationic resin with sodium cycle, hardness calibrator, self-disinfection system for resins, valve
by pass, hardness analysis kit. Exclusions: salt. Equipment compliant with Ministerial Decree 25/12 and with Ministerial Decree 174/04.
Technical data:
- Volume of resin, liters: 17
- Connections: 1”M
- Cyclic capacity, m3x°F: 113
- Nominal flow rate, m3/h: 1.5
- Peak flow rate*, m3/h: 2.3
- Pressure drop at short peak flow rate, bar: 1.0
- Maximum salt consumption for regeneration, Kg: 4.13
- Min-max pressure, bar: 1.3 – 8.5
- Dimensions H x W x D, mm: 840x510x402
- Power supply, V/Hz: 230/50
- Water temperature, min./max, °C: 4-49
CODE | CD10417 |
MODEL | 17 |
ATTACKS WITH BY-PASS | 1" M |
RESIN VOLUME LITERS | 17 |
PEAK FLOW RATE m3/h | 4 |
DATA SHEET
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included