Gel acquaclick 4.0 undersink refiner cod. 102.350.00
If you want to drink colorless, odorless and tasteless tap water and above all without any pollutants, it is advisable to install water refining systems under the sink.
Depending on the quality of the water to be treated, various point-of-use devices are available: reverse osmosis, ultrafiltration and activated carbon.
GEL refiners improve the quality of tap water, making it excellent for drinking and cooking.
Characteristics
Acquaclick 4.0 is a patented reverse osmosis system with direct production, capable of improving the quality of tap water, making it excellent for drinking and cooking.
The remote control allows you to dispense refined water directly from your existing faucet (no need to install an additional faucet, nor the 3-way faucet).
On the Acquaclick 4.0 panel, indicator lights indicate when to change the filter and membranes:
- Every year for the carbon filter and for the anti-sediment filter (both with No-drop anti-drip system).
- Every 4 four years for the membrane with No-drop anti-drip system if the quality of the inlet water complies with the technical specifications shown in the "Technical data" table
The No-drop system makes it possible to replace the cartridges without closing the water stopcock and without dripping.
Installs under the sink in minutes.
The system is equipped with a shutter that ensures adequate mixing of the water.
Acquaclick is also equipped with the latest generation RFID system (unique and automatic recognition technology of the new cartridges) in order to allow and guarantee an efficient tracking and tracing process.
All equipment in contact with drinking water is made with top quality materials, in accordance with the provisions of Ministerial Decree 174/2004.
Installation
Before installing AcquaClick 4.0, check for the presence of a 230 V electrical socket in the space under the sink.
- Close the cold water stopcock and insert Easy click between the faucet and the hose.
- Drill the drain siphon after inserting the saddle clamp in vertical position.
- Place AcquaClick 4.0 in the space under the sink.
- Connect one end of the drain hose to the bracket and the other to the corresponding fitting on the back of the machine.
- Correctly connect the other two pipes, water inlet and permeate outlet, to the post fittings on the back of the machine.
- Plug the power supply into the electrical outlet.
- To set up the association of Acquaclick 4.0 with its remote control, it is necessary to power up the system electrically by holding down the button on the remote control until confirmation occurs with a sound "beep" (the button on the remote control must be pressed within 10 seconds of powering up the machine) .
NB. For details on installation and maintenance, refer to the relative use and maintenance manual.
Maintenance
From when the filter and membrane LEDs on the panel start flashing, you have 30 days to replace them before the machine block is displayed with a steady red LED.
NB. For details on installation and maintenance, refer to the relative use and maintenance manual.
First name | Acquaclick 4.0 |
Code | 102.350.00 |
LxHxZ (cm) | 23x43x32.5 |
Operating pressure (bar) | 2÷4 |
Water production (l/min) | 1.5 |
max conductivity IN ( µS/cm) | 1500 |
Power supply (V-Hz) | 220-50÷60 |
Absorption in production (W) | 80 |
Stand-by absorption (W) | <1 |
INSTALLATION SCHEME
TECHNICAL DETAILS
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included