GEL Long life 710 sanitizing biocide 5L cod. 113.167.21

GEL Long life 710 sanitizing biocide 5L cod. 113.167.21

Description

Non-oxidizing product for eliminating the bacterial load present in underfloor systems.

Long Life 710 is able to solve the typical problems deriving from the microbiological growth of underfloor systems such as: bad smells, corrosion of the collectors and exchangers, blockage of valves, pipes and heat exchangers.

Use and dosage

Long Life 710 can be introduced directly into the full system via GEL loading devices in the system expansion vessel or via a dosing pump.

The dosage depends on the state of the system: - New system. 0.5% of Long Life 710 (referred to the volume of the system) for preventive purposes. - Contaminated system. 0.5% of Long Life 710 (referring to the volume of the system), leaving it to act for up to 24 hours with a circulator or 2 hours with a Long Life Super Flush pump.

Once the treatment has been carried out, empty the system and rinse until clean water is obtained.

Refill the system with clean water by adding 0.5% of Long Life 710 with the addition of corrosion inhibitor

Long Life 100.

Further information

Use Long Life 710 with a clean system.

Wash with Long Life 300 cleaner on new systems or Long Life 400/800 restorer on existing systems.

The product must be replenished annually.

For detailed information on safety relating to the use and use of the product, refer to the relative Safety Data Sheet.

Regulations

The treatment of water in domestic heating systems is specified by the UNI-CTI 8065/89 standard referred to by Presidential Decree 59 of 2/4/2009 and by the UNI-CTI 8364/1/2/3 standards of 2007.