GEL Long life 800 restorative for termi systems 5L cod. 113.165.71

GEL Long life 800 restorative for termi systems 5L cod. 113.165.71

Description

Non-acid product with a strong dispersing and restoring action for the removal of high presence of metal oxides and encrustations formed over time in heating systems.

Long Life 800 is capable of dispersing and suspending even the most resistant sludge present in the system, restoring correct circulation in the partially blocked radiant elements.

Long Life 800 eliminates the need to clean the system with acid products by solving the problems associated with them.

The product can be used on all metallic materials present in the system including aluminium.

Use and dosage

Long Life 800 can be introduced directly into the full system using the Termo Tank loading device or via a dosing pump or using the vent valve of a radiator or directly into the system's expansion vessel.

It is recommended to use the product with Long Life Super Flush high circulation pumps for faster and more effective cleaning.

Long Life 800 is a ready to use product.

Dose 1 liter of product for every 100 liters of water in the system.

Repeat the treatment if necessary.

Once the treatment has been carried out, empty the system and rinse until clean water is obtained.

Recondition the system with Long Life 100 Corrosion Inhibitor.

Further information

Treatment with Long Life 800 is recommended before installing a new boiler or pump on a

pre-existing plant. Once the system has been flushed, fill the system by adding the Long Life 100 or Long Life 500 corrosion inhibitor (for cold climates) to prevent the re-formation of scale or corrosive phenomena.

For detailed safety information relating to the handling and use of Long Life 300, refer to the relative Safety Data Sheet.

Regulations

The treatment of water in domestic heating systems is specified by the UNI-CTI 8065/89 standard referred to by Presidential Decree 59 of 2/4/2009 and by the UNI-CTI 8364/1/2/3 standards of 2007.