Vernifer 1xTutti bright forest green 500 ml cod. 4606

Vernifer 1xTutti bright forest green 500 ml cod. 4606

Description:

Acrylic enamel with anti-corrosion properties, capable of protecting metal products from corrosion.

It has excellent wettability of the support, excellent flow and high water resistance.

Enamel suitable for interior and exterior applications and is available in various colours.

USE:

Product intended for the protection and finishing of iron artefacts, including rusty ones.

It does not require the application of an anti-corrosion primer. Suitable for both indoors and outdoors.

It can also be applied, with good results, to wood, concrete, galvanized sheet metal and aluminium.

USE:

Apply Vernifer 1XTUTTI after mixing it evenly.

For spray gun applications dilute with water (5-10%).

New surfaces: degrease the surface with a quick-drying thinner (nitro thinner, acetone, alcohol) before applying the product.

Already painted surfaces: mechanically remove old paint and rust residues, degrease the surface with a quick-drying thinner (nitro thinner, acetone, alcohol) before applying the product.

For interior applications, a coat of paint is sufficient.

For outdoor applications, two coats of paint are recommended.

Brushes and equipment can be cleaned with hot water if the product is fresh, otherwise with acetone and nitro thinner.

WARNINGS:

• Mix carefully before and occasionally during application, to maintain correct color uniformity.

• It is always advisable to carry out a preliminary test to evaluate the aesthetic result

• Brushes and equipment can be cleaned with hot water if the product is fresh, otherwise with acetone and nitro thinner.

• Do not apply with an ambient and support temperature lower than 10°C or higher than 30°C.

STORAGE:

In intact packaging and stored at room temperature for at least 24 months.

DANGER FROM FROST, do not keep below +10°C