Anti-rust paint and bright white paint 2 lt cod. 4924

Anti-rust paint and bright white paint 2 lt cod. 4924

Description:

Painting product that combines the properties of an excellent enamel (coverage, shine, color range, protection from bad weather) with those typical of an anti-rust primer (corrosion protection and inhibition).

Structured in the form of a soft gel to avoid dripping and ensure, at the same time, excellent brushability.

NB: the covering power depends on the shade and the color of the base.

Suitable for exteriors and interiors.

Available in bright, satin, metallic and antique colours.

USE:

Product intended for the protection and finishing of iron artefacts, including rusty ones.

It does not require the application of an anti-corrosion primer.

Suitable for both indoors and outdoors.

It can also be applied, with good results, to wood, concrete and aluminium.

On galvanized sheet metal it is recommended to apply a coat of FEROX to prevent the paint from flaking.

HOW TO USE:

For brush applications the product is ready to use.

In the presence of separation of surface liquid it must be mixed until it is homogenized again.

For roller application dilute with approx. 5% white spirit.

For spray gun applications dilute with approx. 5–15% white spirit.

Preparation of the support: New surfaces: degrease the surface with white spirit and apply Vernifer.

Already painted surfaces: brush off peeling paint and crumbly rust, degrease and proceed with Vernifer.

Cleaning with nitro thinner is not recommended due to incompatibility with Vernifer.

Advice: for interior applications a coat of paint is sufficient.

For outdoor applications, two coats are recommended.

High environmental humidity and excessive thicknesses delay the hardening of the applied film.

STORAGE:

In intact packaging, stored at room temperature, away from direct sunlight for at least: 3 years.