Tecnogas mechanical ventilation SPECTER ACTIVE 2.0 160 mm cod. 14421

Tecnogas mechanical ventilation SPECTER ACTIVE 2.0 160 mm cod. 14421

SPECTER is the ideal solution for the Controlled Mechanical Ventilation of individual rooms both in the case of renovation of apartments or offices and in all situations where it is not possible to use a ducted ventilation system due to lack of space.

Specter allows you to obtain air flow rates with alternating expulsion or intake flows of up to 60 m3/h, thus allowing adequate air exchange to be carried out even in large rooms. In fact, for 70 seconds Specter extracts the hot and stale air present in the room towards the outside. During its passage through the duct, the air releases its thermal energy which is accumulated by the ceramic exchanger; at the end of this phase, the fan reverses the direction of rotation and starts the intake phase for another 70 seconds. The cold external air, passing through the hot exchanger, recovers the thermal energy and is then released into the environment at a more comfortable temperature. This allows for significant energy savings to be achieved, as it prevents the heating system from operating at maximum intensity as would happen in the event of air exchange by opening the windows.

Product Features:

• Motor fan positioned after the exchanger, inside the wall, to make the product extremely silent (only Ø 160 model)
• Quick and simple maintenance, the extraction of the fan unit does not affect the terminal block
• More efficient: 150 mm long ceramic heat exchanger, for higher efficiency (up to 93%)
• Silent: external grille designed to ensure better air flow and reduce noise coming from outside; motor positioned inside the wall beyond the exchanger
• Turning on/off
• Speed 1 and 2
• Front cover in ABS
• Equipped with a tilting front to prevent unwanted air from entering when the product is turned off
• Standard tube length 500 mm; available as a 700 mm tube accessory
• Minimum wall depth 250 mm for the 160 and 200 mm for the 100 - maximum depth 3 m (2.5 m if 90° bend is present)
• Simplicity of maintenance and cleaning
• Double dust filter, washable and easily accessible for maintenance
• DC motor fan, brushless with control electronics, on ball bearings
• LED visual indicators for receiving commands and cleaning filters
• Humidity and twilight sensor (Active and Wireless versions)
• The last set function is memorized and automatically restored in the event of a power failure
• Caps for closing the pipes during preparation included in the package (only Ø 160 model)
• Does not require condensate drain
• Possibility of replacing the standard filter with the ISO COARSE 45% (only Ø 160 model)
• Cable communication between units
• Remote control with display
• Integrated humidity and twilight sensor
• Possibility of managing up to 16 units within a system in master/slave mode
• 3 adjustable speeds + night function

Modes and functions of the remote control with display

• Surveillance mode: the product will remain off but still active thanks to the sensors, it will be activated automatically if the ambient humidity exceeds the set value
• Flow speed
• Humidity control
• Automatic mode: the unit is managed automatically via the humidity sensors
• Night function: to further reduce the air flow and therefore the noise
• Flow function: Select the air flow direction
• Manual mode: operating mode with manually set speed (sensors excluded)
• Boost function: allows you to expel air at maximum speed for a limited period
• Filter reset: after carrying out ordinary cleaning, press the button to restore operation

Glossary of remote control buttons:

• S lock key
• V manual speed selection
• H relative humidity threshold selection
• M main mode selection
• No night mode selection
• B selection of timed expulsion mode
• F air flow mode selection
• R filter alarm reset