Tecnogas mechanical ventilation ASSOLO TE-22 1.0 100 cod. 14386

Tecnogas mechanical ventilation ASSOLO TE-22 1.0 100 cod. 14386

ASSOLO TE-22 is the ideal solution for the Controlled Mechanical Ventilation of individual environments where it is not possible to use a ducted ventilation system due to lack of space. ASSOLO TE-22 is easy to install and is characterized by a modern and elegant design that integrates easily into any home and work environment. The system allows obtaining air flow rates with alternating expulsion or intake flows of up to 60 m3/h, thus allowing adequate air exchange to be carried out even in large rooms.

Product Features:

• High efficiency heat exchanger (up to 93%) made of ceramic material
• Front cover in ABS
• Closing damper to prevent unwanted air from entering when the product is turned off
• External ABS grille designed to minimize noise coming from the outside
• Standard hose length 500mm (available as 700mm hose accessory)
• Minimum wall depth 200 mm for both Ø 160 and Ø 100 - maximum depth 3 m (2.5 if 90° bend present)
• DC motor fan, brushless with control electronics, on ball bearings
• Simple maintenance and cleaning
• Double dust filter, washable and easily accessible for maintenance
• LED visual indicators for receiving commands and cleaning filters
• The last set function is memorized and automatically restored in the event of a power failure
• Does not require condensate drain
• Turning on/off
• Selection of 3 pre-set speeds via the included remote control (allows you to select 3 air flow speeds and turn the device on and off)

Manual

Data sheet