Arexons System liquid steel 25 ml cod. 4762
Two-component epoxy resin-based adhesive ideal for very strong bonding of difficult materials, even for non-matching surfaces. It can be used to fill holes and cracks in metal parts. Also glues: glass, ceramic, crystals, marble, stone, wood, plastics (except PE, PP, rigid PVC and PTFE), hardens in a few minutes. It does not contain solvents and does not shrink. After hardening the product is steel in colour, it can be painted, drilled, sanded with abrasive paper. It resists temperatures between –30°C and +80°C. It resists washing with even hot water, solvents, oils, greases, etc.
DESCRIPTION
Two-component adhesive based on liquid epoxy resins containing powdered metal with thixotropic additive.
Ideal for very strong bonding of difficult materials, even for non-matching surfaces.
It can be used to fill holes and cracks, it hardens in a few minutes.
It does not contain solvents, therefore it does not shrink during hardening.
After hardening the product is steel in colour, it can be painted, drilled, sanded with abrasive paper.
It resists temperatures between –30°C and +120°C. It resists washing with even hot water, solvents, oils, greases, etc
USE
Ideal for gluing and repairing metal parts. Also glues: glass, ceramic, crystal, marble, stone, wood, plastics (except PE, PP, rigid PVC and PTFE).
It guarantees excellent results even on non-matching surfaces.
USE
The surfaces must be slightly roughened, clean and degreased (with acetone or alcohol) and dry.
Mix resin and catalyst very carefully in equal parts.
Apply, within 5 minutes of mixing, a thin layer of adhesive on both surfaces.
Keep the parts in contact for 10-15 minutes; you can reposition the parts within the first 5 minutes.
The hardening time depends on the temperature and thickness; generally objects can be handled after about 20 minutes.
Complete hardening occurs after 24 hours.
To clean tools or any burrs, use acetone or alcohol immediately after use.
The hardened adhesive is removed by mechanical action.
WARNINGS
The hardening reaction involves the development of heat (around 50-60°C for a few minutes).
After use, carefully close the syringe.
Contact, even accidental, of the hardener with the resin causes the adhesive to harden.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included