Arexons System repairs plastic 57 gr cod. 4749

Arexons System repairs plastic 57 gr cod. 4749

It is used to repair, reconstruct, block, seal, putty, even under water, any plastic and fiberglass surface. Repairs pipes, PVC pipes, plastic parts of bicycles, motorbikes and cars, boat hulls, water cans, tanks. Seal electrical cables with connection boxes. Also ideal for ceramic, glass, concrete. Ready to use. Strong, easy, quick. It also adheres to wet surfaces. Does not shrink during hardening. Can be used on ABS, PVC, fiberglass and plastics in general, with the exception of Polyethylene, Polypropylene and PTFE. After hardening, it can be drilled, sanded, machined, painted.

DESCRIPTION

Two-component co-extruded stucco, in stick form, based on epoxy resin.

The cross-linking component is encapsulated in the resin, which makes the dosage of the two components and the subsequent cross-linking easy and automatic.

It adheres to wet surfaces and allows operation in the presence of slight liquid spills.

After mixing it hardens in approximately 15 minutes without any shrinkage.

It can be painted and can be sanded or worked with tools after approximately 1 hour.

It resists up to 120°C with peaks of 150°C.

USE

Ideal for fiberglass and plastic materials in general, with the exception of polyethylene, polypropylene and PTFE.

It is used to repair PVC pipes, plastic parts of bicycles, motorbikes, cars, boat hulls, water cans, tanks...

Rebuilds missing parts. Seal electrical cables with connection boxes.

Not suitable for polyethylene (PE), polypropylene (PP), PTFE.

USE

Clean and degrease the parts to be glued, light sanding improves adhesion. Detach

the necessary quantity from the stick and mix until obtaining a homogeneous colour. To apply

within 5 minutes.

Force the product into the hole or crack to be repaired, eliminating excess.

If applied on a wet surface or in the presence of a leak, keep the resin pressed until

membership does not begin to take effect. After about 15 minutes the resin hardens and after 1

now it is possible to sand, sand, sand and paint.

WARNINGS

Since the product is irritating, it is advisable to use a pair of gloves to mix the product.

Data sheet