Arexons System 52A70 strong thread lock 250 ml cod. 4702
Arexons System 52A70 strong threadlocker 250 ml cod. 4702
For braking studs, nuts and bolts that are not subject to dismantling. Low viscosity product. Eliminates loosening due to vibrations, shocks, temperature changes. Prevents corrosion and seizure. Permanent braking. High resistance to water, oils, fuels, hydraulic and refrigerant fluids, gases, vapours. Tested according to DIN 54454 standards. Operating temperature: from -55°C to +150°C. Maximum diametric clearance: 0.15 mm. Storage at room temperature: 18 months minimum.
Arexons System 52A70 strong threadlocker 250 ml cod. 4702
DESCRIPTION
Specific product for the permanent braking of studs, nuts, bolts.
Recommended for braking threaded parts not subject to dismantling.
Low thixotropy product.
Eliminates the use of conventional braking means such as nuts, lock nuts, washers, growers, self-locking nuts.
Avoids loosening due to vibrations, shocks, temperature changes.
It has high resistance to water, oils, fuels, hydraulic and refrigerant fluids, gases and vapours.
Prevents corrosion.
Also suitable for surfaces with a slight presence of oil.
USE
Permanent braking of studs, nuts, bolts.
CLASSIFICATION
Product tested according to DIN 54454 standards
USE
Surfaces must be clean and dry. We recommend using System MC217.
Apply the product on the bolt in the coupling area with the nut.
For blind holes, apply the product to the bottom of the hole.
Assemble and tighten as required.
Wait for the expected polymerization times before moving the coupling.
For application temperatures lower than +15°C or in case of slow polymerization speed, System AP724 Rapid Primer can be used.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included