Arexons System C630 cyanoacrylate porous materials 20 ml cod. 4759

Arexons System C630 cyanoacrylate porous materials 20 ml cod. 4759

For bonding absorbent materials (leather, cork, softwood, porous rubber, ferrite, ceramic, porcelain, expanded plastics), vertical surfaces, surfaces with tolerances up to 0.25 mm. High viscosity colorless single-component adhesive. Glues quickly, forming an invisible, vibration-resistant joint. 50% of the final adhesion occurs after approximately 30'. It hardens at room temperature due to the effect of air humidity (optimal RH: 40-70%). Thanks to its high viscosity, it does not penetrate through porosity, allowing for strong bonding. Covers relatively large tolerances between surfaces. Storage between +2°C and +10°C: minimum 12 months. It is recommended to keep the product in a cool, dry and dark place.

DESCRIPTION

Transparent, high viscosity single-component cyanoacrylic adhesive, particularly suitable for bonding materials considered porous or placed in a vertical position.

USE

absorbent materials such as:

• Leather
• Cork
• wood
• porcelain
• ferrite

bonding of surfaces with tolerances up to 0.25 mm

USE

Clean the parts to be glued carefully with alcohol or acetone.

Check that the surfaces match perfectly.

Apply a thin layer of adhesive on only one of the two parts to be glued (the smaller the quantity, the faster and more tenacious the gluing).

Bring the surfaces together and press for a few seconds.

Product soluble in DMF, acetone, acetonitrile.

WARNINGS

The product works quickly, it is able to quickly glue even the skin.

In this case it is advisable to gently and gradually separate the glued skin with the help of warm water and soap.

Avoid forcible detachment and/or the use of sharp objects which can cause worse injuries.

Data sheet