Arexons System 52A22 weak thread lock 50 ml cod. 4709

Arexons System 52A22 weak thread lock 50 ml cod. 4709

For braking threaded parts that must be easily dismantled and components made of light alloys or non-ferrous materials that could otherwise be damaged during disassembly. Medium thixotropic product: does not drip. Avoids loosening due to vibrations, shocks, temperature changes. Prevents corrosion and seizure. Allows easy disassembly with normal tools. High resistance to water, oils, fuels, hydraulic and refrigerant fluids, gases and vapours. Tested according to DIN 54454 standards and approved, as a sealant, according to DIN 30661 - Class 1 standards. Operating temperature: from -55°C to +150°C. Maximum diametric clearance: 0.20 mm. Storage duration at room temperature: 18 months minimum.

PRODUCT DESCRIPTION

Specific product for weak braking of threaded parts that must be easily dismantled.

Suitable for adjustment screws in general and for components made of light alloys or non-ferrous metals which could be easily damaged during disassembly.

Low thixotropy product.

The thixotropic characteristic avoids sagging and allows application without waste.

Avoids loosening due to vibrations, shocks, temperature changes.

It has high resistance to water, oils, fuels, hydraulic and refrigerant fluids, gases and vapours.

Prevents corrosion and seizure.

USE

Braking of adjustment screws in general and for components made of light alloys or non-ferrous metals.

USE

Surfaces must be clean and dry.

We recommend using System MC217.

Apply the product on the bolt in the coupling area with the nut.

For blind holes, apply the product to the bottom of the hole.

Assemble and tighten as required.

Wait for the expected polymerization times before moving the coupling.

For application temperatures lower than +15°C or in case of slow polymerization speed, System AP724 Rapid Primer can be used.