Pedrollo three-phase sewage pump VX 20/35 ST cod. 48SGV96C2AU
Pedrollo three-phase sewage pump VX 20/35 ST cod. 48SGV96C2AU
Submersible electric pumps for sewage drainage in stainless steel. Vortex impeller.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo three-phase sewage pump VX 20/35 ST cod. 48SGV96C2AU
- Liquid type: Sewage water
- Uses: domestic, civil, industrial
- Uses: handling of waste water, tank transfer, draining, drainage
- Type: submarines
- Family: sewage lifting
The VX-ST stainless steel submersible electric pumps are recommended for the drainage of waste water in the domestic, civil and industrial sectors, in all cases where suspended solid bodies are present in the water, for example water mixed with mud, groundwater, surface waters.
Its use is recommended for draining flooded environments such as basements, underground car parks, car washing areas, for emptying cesspits and for the disposal of sewage.
These pumps stand out for their reliability in fixed installations with automatic operation.
External float switch and rocker device for the float cable, only for single-phase versions.
Performance range:
- Flow rate up to 700 l/min (42 m³/h)
- Head up to 17 m
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level up to 5 m (with power cable of adequate length)
- Passage of suspended solid bodies up to Ø 40 mm
- For continuous service minimum immersion 360 mm
MOTOR
| Guy | Power P2 | |
| Three-phase | kW | HP |
| 50Hz | 1.5 | 2 |
| Voltage | |||
| 230V | 400V | 240V | 415V |
| 6.4A | 3.7A | 6.1A | 3.5A |
PERFORMANCE
| Q m3/h | 0 | 3 | 6 | 12 | 18 | 21 | 24 | 27 | 30 | 31.5 |
| Q l/min | 0 | 50 | 100 | 200 | 300 | 350 | 400 | 450 | 500 | 525 |
| H meters | 17 | 16.5 | 15.9 | 14 | 11 | 9.5 | 7.7 | 5.7 | 3.5 | 2.5 |
CHARACTERISTICS
| Body Pump | AISI 304 stainless steel, equipped with ISO 228/1 threaded mouth |
| Basic | AISI 304 stainless steel |
| Impeller | VORTEX type in technopolymer. The VORTEX impeller allows the pumping of solid bodies with a diameter of up to 50 mm and thanks to its particular geometry it guarantees safe operation against clogging. |
| Engine carrier | AISI 304 stainless steel |
| Engine cover | Cast iron with cataphoresis treatment |
| Crankshaft | AISI 431 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Power cord |
H07 RN-F 10 meters with Schuko plug only for single-phase versions |
Dimensions and weight
 |
|||||||
| to | b | c | h | h1 | d | p |  |
| 95 | 96 | 140 | 502 | 106 | 55 | 500 | 500 |
| And | DN | Passage of solid bodies | Weight |
| adjustable | 1 1/2" | diameter 40 mm | 15.6kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included