Pedrollo three-phase sewage pump VX 15/50 cod. 48SGV91E0AU
Pedrollo three-phase sewage pump VX 15/50 cod. 48SGV91E0AU
Submersible electric pumps for sewage drainage. Vortex impeller.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo three-phase sewage pump VX 15/50 cod. 48SGV91E0AU
- Liquid type: Sewage water
- Uses: domestic, civil, industrial
- Uses: handling of waste water, tank transfer, draining, drainage
- Type: submarines
- Family: sewage lifting
They are recommended for domestic, civil and industrial use, in all cases where suspended solid bodies of dimensions up to Ø 50 mm are present in water, for example groundwater, surface water, sewage and waste water.
Use is recommended for draining flooded environments, such as basements, underground car parks, car washing areas, for domestic waste, emptying cesspits, disposal of sewage.
These pumps stand out for their reliability, particularly in fixed installations with automatic operation.
External float switch for single-phase versions only.
Performance range:
- Flow rate up to 750 l/min (45 m³/h)
- Head up to 15.50 m
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level up to 5 m (with power cable of adequate length)
- Passage of suspended solid bodies up to Ø 50 mm
- For continuous service minimum immersion 330 mm
MOTOR
| Guy | Power P2 | |
| Three-phase | kW | HP |
| 50Hz | 1.1 | 1.5 |
| Voltage | |||
| 230V | 400V | 240V | 415V |
| 4.7A | 2.7A | 4.5A | 2.6A |
PERFORMANCE
| Q m3/h | 0 | 3 | 6 | 12 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 |
| Q l/min | 0 | 50 | 100 | 200 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 |
| H meters | 11.5 | 11 | 10.5 | 9.8 | 8.7 | 8 | 7.5 | 6.5 | 5.5 | 4.5 | 3.5 | 2 |
CHARACTERISTICS
| Body Pump | Cast iron with cataphoresis treatment for greater resistance to corrosion, equipped with ISO 228/1 threaded mouth |
| Basic | AISI 304 stainless steel |
| Impeller | VORTEX type in technopolymer. The VORTEX impeller allows the pumping of solid bodies with a diameter of up to 50 mm and thanks to its particular geometry it guarantees safe operation against clogging. |
| Engine holder | AISI 304 stainless steel |
| Engine cover | Impeller with cataphoresis treatment |
| Crankshaft | AISI 431 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Power cord | H07 RN-F, 10 metres |
Dimensions and weight
 |
||||||||
| to | b | c | f | h | h1 | d | p |  |
| 115 | 95 | 148 | 200 | 484 | 158 | 55 | 500 | 500 |
| And | DN | Passage of solid bodies | Weight |
| adjustable | 2" | diameter 50 mm | 16.9kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included