Pedrollo sewage pump VXm 8/35 cod. 48SGV90A0A1
Pedrollo sewage pump VXm 8/35 cod. 48SGV90A0A1
Submersible electric pumps for sewage drainage. Vortex impeller.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo sewage pump VXm 8/35 cod. 48SGV90A0A1
- Liquid type: Sewage water
- Uses: domestic, civil, industrial
- Uses: handling of waste water, tank transfer, draining, drainage
- Type: submarines
- Family: sewage lifting
They are recommended for domestic, civil and industrial use, in all cases where suspended solid bodies of dimensions up to Ø 50 mm are present in water, for example groundwater, surface water, sewage and waste water.
Its use is recommended for draining flooded environments, such as basements, underground car parks, car washing areas, for domestic waste, emptying cesspits, and sewage disposal.
These pumps stand out for their reliability, particularly in fixed installations with automatic operation.
External float switch for single-phase versions only.
Performance range:
- Flow rate up to 750 l/min (45 m³/h)
- Head up to 15.50 m
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level up to 5 m (with power cable of adequate length)
- Passage of suspended solid bodies up to Ø 40 mm
- For continuous service minimum immersion 290 mm
MOTOR
| Guy | Voltage | Power P2 | ||
| Single phase | 230V | 240V | kW | HP |
| 50Hz | 4.3A | 4.2A | 0.55 | 0.75 |
PERFORMANCE
| Q m3/h | 0 | 3 | 6 | 12 | 18 | 21 |
| Q l/min | 0 | 50 | 100 | 200 | 300 | 350 |
| H meters | 9 | 8 | 7.5 | 5.5 | 2.7 | 1 |
CHARACTERISTICS
| Body Pump | Cast iron with cataphoresis treatment for greater resistance to corrosion, equipped with ISO 228/1 threaded mouth |
| Basic | AISI 304 stainless steel |
| Impeller | VORTEX type in technopolymer. The VORTEX impeller allows the pumping of solid bodies with a diameter of up to 50 mm and thanks to its particular geometry it guarantees safe operation against clogging. |
| Engine holder | AISI 304 stainless steel |
| Engine cover | AISI 304 stainless steel |
| Crankshaft | AISI 431 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Capacity | 20 μF - 450 VL |
| Power cord | H07 RN-F, 5 meters with Schuko plug |
Dimensions and weight
 |
||||||||
| to | b | c | f | h | h1 | d | p |  |
| 115 | 95 | 148 | 200 | 425 | 158 | 55 | 500 | 500 |
| And | DN | Passage of solid bodies | Weight |
| adjustable | 1 1/2" | diameter 40 mm | 13.7kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included