Pedrollo electric pump with three-phase shredder TR 0.75 cod. 48SHT00A
Pedrollo electric pump with three-phase shredder TR 0.75 cod. 48SHT00A
TRITUS submersible electric pump with high resistance tempered stainless steel shredder.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo electric pump with three-phase shredder TR 0.75 cod. 48SHT00A
- Liquid type: Sewage water
- Uses: domestic, civil, industrial
- Uses: handling of waste water, tank transfer, draining, drainage
- Type: submarines
- Family: sewage with grinder
The shredder pumps of the TRITUS series are equipped with a SHREDDER made of high-resistance tempered stainless steel which allows the complete shredding of solid bodies and fibers contained in waste and waste water in the domestic, civil and industrial sectors, for conveying under pressure into the sewer system through small diameter pipes.
External float switch, only for single-phase versions.
Standard equipment with electrical panel, only for single-phase versions.
Performance range:
- Flow rate up to 410 l/min (24.6 m³/h)
- Head up to 44.50 m
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level up to 10 m (with power cable of adequate length)
- bottom emptying level up to 85 mm
- For continuous service minimum immersion 300 mm
MOTOR
| Guy | Power P2 | |
| Three-phase | kW | HP |
| 50Hz | 0.75 | 1 |
| Voltage | |||||
| 230V | 400V | 240V | 415V | ||
| 4.3A | 2.5A | 4.2A | 2.4A | ||
PERFORMANCE
| Q m3/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 6 | 7.5 |
| Q l/min | 0 | 20 | 40 | 60 | 80 | 100 | 125 |
| H meters | 16.5 | 15 | 13.5 | 11.8 | 10 | 7.5 | 2 |
CHARACTERISTICS
| Body Pump | Cast iron with cataphoresis treatment, equipped with ISO 228/1 threaded mouth |
| Impeller | Open type in technopolymer |
| Shredder | Tempered AISI 440C stainless steel |
| Engine holder | Cast iron with cataphoresis treatment |
| Crankshaft | AISI 431 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Power cord | H07 RN-F 10 metres |
Dimensions and weight
 |
||||||
| to | b | c | h | h1 | d |  |
| 140 | 104 | 186 | 406 | 80 | 85 | 500 |
| And | p | DN | Weight |
| adjustable | 500 | 1 1/4" | 22kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included