Description
Pedrollo electric pump with TIGm 0.55 shredder cod. 48SHTG055A1
- Liquid type: Sewage water
- Uses: domestic
- Uses: handling of waste water, tank transfer, draining, drainage
- Type: submarines
- Family: sewage with grinder
The shredder pumps of the TRITUS INOX series are equipped with a SHREDDER made of high-resistance tempered stainless steel which allows the complete shredding of solid bodies and fibers contained in waste water and wastewater in domestic systems, for conveying under pressure into the sewer system through small pipes. diameter.
Performance range:
- Flow rate up to 140 l/min (8.4 m³/h)
- Head up to 18.50 m
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level up to 5 m (with power cable of adequate length)
- bottom emptying level up to 85 mm
- For continuous service minimum immersion 250 mm
MOTOR
Guy | Voltage | Power P2 | ||
Single phase | 230V | 240V | kW | HP |
50Hz | 4.5A | 4.3A | 0.55 | 0.75 |
PERFORMANCE
Q m3/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 6 | 7.2 | 7.8 |
Q l/min | 0 | 20 | 40 | 60 | 80 | 100 | 120 | 130 |
H meters | 16 | 14.5 | 13.3 | 11.8 | 10.1 | 8.1 | 5.7 | 2 |
CHARACTERISTICS
Body Pump | Cast iron with cataphoresis treatment, equipped with ISO 228/1 threaded mouth |
Impeller | Open type in technopolymer |
Shredder | Tempered AISI 440C stainless steel |
Engine holder | AISI 304 stainless steel |
Crankshaft | AISI 431 stainless steel |
Isolation | F class |
Protection | IP X8 |
Capacity | 25 μF - 450 VL |
Power cord | H07 RN-F 10 metres |
Dimensions and weight
to | b | c | f | h | h1 | d | |
115 | 85 | 147 | 177 | 398 | 117 | 65 | 500 |
And | p | DN | Weight |
adjustable | 500 | 1 1/2" | 15kg |
Data sheet
Shipping
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included