Claber hydro 4 with programmer and 4 solenoid valves cod. 90829

Claber hydro 4 with programmer and 4 solenoid valves cod. 90829

Pre-assembled integrated programmer pocket.

It works with 2 mini-AAA batteries, enough for an entire season. It allows you to open and close up to 4 independent underground or drip irrigation lines.

Easy programming, with just 3 buttons and a large display. Watering from 1 to 60 minutes. 2 programs for each output, up to 8 watering cycles per day. Weekly setting with exclusion of days. Manual 5 minute test function, modifiable like irrigation times.

IP68 waterproof: the highest degree of submersibility. Protective cover and buttons in bi-material rubber. Allows you to view the programs entered for each unit and make deletions. 3/4” M (20 - 27 mm) connections for both inlet and outlet.

Can be connected to a radio frequency Rain Sensor. 5 threaded plugs supplied for unused outlets. 4 bistable solenoids. Line flow rate: max 25 l/min at 2.5 bar. Operating pressure: min 1 - max 6 bar. Operating temperature: 3° - 60°. Overall dimensions: diameter 200 - h. 153 mm.

A practical and ready-to-use solution to manage the irrigation of the most common gardens (up to approximately 700 m2). Hydro-4 is a watertight well, containing a battery-powered programmer and 4 solenoid valves. Thanks to its compact dimensions, Hydro-4 can be buried with a few strokes of the spade, or it can also be used above ground.

MATERIALS

body: PA6

lid: PA6

TECHNICAL FEATURES

Inlet thread diameter: 3/4"

Outlet thread diameter: 3/4"

Pressure (of use): 1 - 6 bar

Releases: 4

Programs: 2

Program type: customizable

Max watering frequency: 8 per day

Min watering duration: 00:01′

Max watering duration: 01:00′

Flow rate: 25 l/min at a pressure of 2.5 Bar

Rain sensor: radio frequency

Power supply: 2xAAA