Claber 1 F programmable solenoid valve cod. 90826

Claber 1 F programmable solenoid valve cod. 90826

Can be installed directly on the tap or on a water intake in the cockpit. Protected by a perfectly watertight lid, it also works in total immersion.

Easy to program with just three buttons. Irrigation times from 1 minute to 23 hours and 59 minutes with the possibility of carrying out up to 6 irrigation cycles per day. Manual and weekly programming with exclusion of the days of the week. Low energy consumption 9V bistable solenoid.

It runs on a 9V alkaline battery sufficient for an entire season. Electronic part separable from the hydraulic part for convenient programming or for storage during the winter. Operating pressure from 0.5 to 12 bar. 1" F (26-34 mm) inlet and outlet thread. Flow rate from 4.6 to 96 litres/minute. Operating temperature from +5° to +70°.

A practical and reliable solution for programming underground irrigation systems, it controls an irrigation line in the absence of mains electricity.

MATERIALS

body: PA6

cover: PC, rubber

FAST GUIDE

TECHNICAL FEATURES

Inlet thread diameter: 1"

Outlet thread diameter: 1"

Pressure (of use): 0.5 - 12 bar

Power supply voltage: 9V

Releases: 1

Programs: 6

Program type: customizable

Max watering frequency: 6 per day

Min watering duration: 00:01′

Max watering duration: 11.59′

Rain sensor: no

Power supply: 1x9V