Calpeda pump with peripheral impeller Series T - TM - TP - TPM -BT - BTP

Calpeda pump with peripheral impeller Series T - TM - TP - TPM -BT - BTP

Execution

Monobloc electric pumps with peripheral impeller.

T, TP: version with pump body and fitting in cast iron.

BT, B-TP: version with pump body and bronze fitting.

The bronze pumps are supplied fully painted.

Employments

For clean liquids without abrasive parts, without suspended parts,

non-explosive, non-aggressive to the pump materials.

To increase the pressure available from a distribution network

(observe local regulations).

Due to their small size, these electric pumps are ideally suited

for mounting in cooling machines and equipment

and conditioning, circulation, boiler feed.

Limits of use

Liquid temperature: from -10 ° C to +90 ° C.

Ambient temperature up to 40 ° C.

Manometric suction height up to 7 m.

Maximum admissible final pressure in the pump body: series

T 12.5 bar, TP 16 bar series.

Maximum final pressure allowed in the pump body: 6 bar.

Continuous service.

Motor

2-pole induction motor, 50 Hz (n = 2900 1 / min).

T, TP: three-phase 230/400 V ± 10%, up to 3 kW;

400/690 V ± 10%, from 4 to 7.5 kW.

TM, TPM: single-phase 230 V ± 10%, with thermal protector.

Capacitor inserted in the terminal box.

Class F insulation.

IP 54 protection.

Three-phase motors with IE3 efficiency class (IE2 up to 0.65 kW).

Execution according to EN 60034-1; EN 60034-30-1.

EN 60335-1, EN 60335-2-41.