Calpeda pump with peripheral impeller Series CT 61
Execution
Monobloc electric pumps with peripheral impeller.
Compact, patented construction with motor housing and wall
pump side in one piece.
Protected against water entering the engine from the outside.
CT: version with cast iron pump body.
B-CT: version with bronze pump body.
The bronze pumps are supplied fully painted.
Employments
For clean liquids without abrasive parts, without suspended parts,
non-explosive, non-aggressive to the pump materials.
To increase the pressure available from a distribution network
(observe local regulations).
Due to their small size, these electric pumps are ideally suited
for installation in cooling machines and equipment,
conditioning and circulation.
Limits of use
Liquid temperature up to 60 ° C.
Ambient temperature up to 40 ° C.
Manometric suction height up to 7 m.
Maximum final pressure allowed in the pump body: 6 bar.
Continuous service (S3 60% for three-phase).
Motor
2-pole induction motor, 50 Hz (n = 2900 1 / min).
CT 61: three-phase 230/400 V ± 10%.
CTM 61: single-phase 230 V ± 10%, with thermal protector.
Capacitor inserted in the terminal box.
Class F insulation.
IP 54 protection.
Three-phase motors with IE2 efficiency class.
Execution according to: EN 60034-1;
EN 60335-1, EN 60335-2-41.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included