Pedrollo submerged pump multi-impeller TOP MULTI 3 EVO cod. 48TPM180MA1U
Pedrollo submerged pump multi-impeller TOP MULTI 3 EVO cod. 48TPM180MA1U
VERSION WITHOUT EXTERNAL FLOAT
Multi-impeller electric submersible pumps recommended for pumping clean water and chemically non-aggressive liquids for the materials making up the pump.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pedrollo sump pump multi-impeller TOP MULTI 3 EVO cod. 48TPM180MA1U
- Liquid type: Clean water
- Uses: domestic
- Uses: irrigation, water supply, pressurization systems
- Type: submerged
- Family: monobloc
TOP MULTI-EVO electric pumps are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials constituting the pump.
Due to their high efficiency and reliability, they are suitable for domestic water supply from relatively deep tanks, tanks or wells, for drawing rainwater from cisterns for hand watering or feeding an irrigation system, etc.
Limits of use:
- Liquid temperature up to +40 °C
- Depth of use below the water level: up to 10 m for TOP MULTI 2-3 EVO (with power cable of adequate length)
- Emptying level up to 35 mm from the bottom for TOP MULTI 2-3 EVO
- Manometric suction height up to 7 m
- Continuous duty S1
MOTOR
| Guy | Voltage | Power P2 | ||
| Single phase | 230V | 240V | kW | HP |
| 50Hz | 3.6A | 3.4A | 0.55 | 0.75 |
PERFORMANCE
| Q | m3/h | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 3.6 | 4.2 | 4.8 | 5.4 | 6.0 | 6.6 | 7.2 |
| l/min | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | |
| H | meters | 30.5 | 30 | 29 | 27.5 | 26 | 24.3 | 22.2 | 19.8 | 17.2 | 14.4 | 11.3 | 8 | 4.5 |
CHARACTERISTICS
| Suction body and delivery body | Technopolymer filled with glass fibre, equipped with ISO 228/1 threaded delivery port |
| Pump body and base | Technopolymer filled with glass fibre |
| Director crown | Technopolymer filled with glass fibre |
| Engine holder | AISI 304 stainless steel |
| Impellers | Noryl |
| Speakers and stadium boxes | Noryl complete with anti-wear rings |
| Crankshaft | AISI 431 stainless steel |
| Isolation | F class |
| Protection | IP X8 |
| Capacitor | 12.5 μF 450 VL |
| Cable | 10 meters H07 RN-F with Schuko plug |
Dimensions and weight
 |
|||||||
| DN1 | DN2 | N° of stages | to | b | h | h1 | Weight |
| 1 1/4" | 1 1/4" | 3 | 239 | 216 | 394 | 68 | 9.9kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included