Description
DAB Wet rotor circulator VS 8/150 M code 60182217
- Circulation pump for closed and pressurized or open vessel domestic hot water systems.
- Also suitable for solar energy systems.
- Bronze pump body.
- Die-cast aluminum engine case.
- Technopolymer impeller.
- Ceramic crankshaft mounted on graphite bushes lubricated by the same pumped liquid.
- Rotor sheath, stator sheath and closing flange made of stainless steel.
- Ceramic thrust ring, ethylenepropylene sealing rings.
- The motor, two or four poles, asynchronous, wet rotor is protected by resistance and does not require any protection against overload.
GENERAL | |
---|---|
Model | VS 8/150 M |
Code | 60182217 |
Wheelbase | 150 mm |
Pump connections | 1 ½” |
Unions on request |
Brass 1/2” F - 3/4” F - 1” F COPPER d22 and d28 |
Liquid temperature range |
from -10°C to +85°C (for sanitary uses) +110°C (for other uses) |
Operating pressure | 10 bar (1000 kPa) |
Insulation class | F |
Circulator protection degree | IP 44 |
Cable gland | PG 11 |
Installation | with the motor axis horizontal |
Impeller/s construction material | Technopolymer |
Weight | 2.6kg |
ELECTRICAL DATA | |
---|---|
Phase | Single phase |
Diet | 230V 50Hz |
P1 Max W | 35 |
In A | 0.19 |
HYDRAULIC DATA | ||||
---|---|---|---|---|
Q=m3h | 0 | 0.6 | 1.2 | 1.8 |
Q=l/min | 0 | 10 | 20 | 30 |
H (m) | 0.83 | 0.75 | 0.52 | 0.22 |
Data sheet
Shipping
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included