Description
DAB Electronic circulator EVOPLUS 40/180 SAN M code 60151144
- Circulation pump for closed and pressurized or open vessel domestic hot water systems.
- Bronze pump body.
- Die-cast aluminum engine case.
- Technopolymer impeller.
- Ceramic crankshaft mounted on graphite bushes lubricated by the same pumped liquid.
- Rotor sheath, stator sheath and closing flange made of stainless steel.
- Ceramic thrust ring, ethylene-propylene sealing rings.
- Synchronous motor with permanent magnet rotor.
The SAN version, with bronze pump body, was developed specifically for the recirculation of domestic water; using the constant temperature operating mode, the temperature of the water in the recirculation pipe is controlled, without the need to use thermostatic valves, thus optimizing comfort.
It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately).
GENERAL | |
---|---|
Model | EVOPLUS 40/180 SAN M |
Code | 60151144 |
Wheelbase | 180mm |
Pump connections | 1" 1/2 |
Standard unions on request | 1"F |
Special unions on request | 1/2” F - 3/4” F - PORT KIT. TO BE WELDED Ø 22 / Ø 28 |
Liquid temperature range | from -10°C to +110°C |
Operating pressure | 16 bar (1600 kPa) |
Insulation class | F |
Circulator protection degree | IP 44 |
European standard compliance | EN 61800-3 - EN 60335-1 - EN 60335-2-51 |
Installation | with the motor axis horizontal |
Weight | 4.5kg |
ELECTRICAL DATA | |
---|---|
Phase | Single phase |
Diet | 1x220/240V, 50/60Hz |
P1 Max W | 70 |
In A | 0.52 |
HYDRAULIC DATA | |||||
---|---|---|---|---|---|
Q=m3h | 0 | 2.4 | 3 | 4.2 | 5.4 |
Q=l/min | 0 | 40 | 50 | 70 | 90 |
H (m) | 4.2 | 4.2 | 4 | 3.1 | 2.4 |
Data sheet
Shipping
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included