DAB EVOPLUS 40/180 M electronic circulator cod.60150938
zoom_out_map
chevron_left chevron_right

DAB EVOPLUS 40/180 M electronic circulator cod.60150938

DAB EVOPLUS 40/180 M electronic circulator cod.60150938

EVOPLUS SMALL electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings.

€517.60 VAT included €424.26 (VAT excl.)
VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

DAB Electronic circulator EVOPLUS 40/180 M code 60150938

The EVOPLUS SMALL electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings.

These electronically regulated wet rotor pumps ensure at all times, in all correctly sized systems, a sufficient quantity of energy and at the same time greater silence / comfort and a significant reduction in operating costs.

The user interface is easy to use and immediately understandable.

APPLICATIONS IN HEATING

The heating required in different applications varies considerably during the day/night due to the external temperature and the more or less constant presence of people inside the rooms. To the above must be added the different needs of the various environments and the possible opening or closing of the various branches in complex systems. Electronically regulated wet rotor pumps ensure at all times, in almost all correctly sized systems, a sufficient quantity of energy and at the same time greater silence/comfort and a significant reduction in operating costs.

APPLICATIONS IN AIR CONDITIONING

Unlike conventional electronic pumps, EVOPLUS electronic circulation pumps can also be used in air conditioning systems where the temperature of the pumped liquid is lower than the ambient temperature. In these conditions, condensation forms on the external surface of the circulator which does not affect the proper functioning of both the electronic and mechanical parts. In fact, the particular construction was designed and sized in such a way as to allow the condensation to drain without damaging the construction components.

CONSTRUCTION FEATURES

Monobloc circulation pump made up of a cast iron hydraulic part and wet rotor synchronous electric motor. Aluminum engine case. Spiral pump body with high hydraulic efficiency thanks to particularly careful design and smooth internal surfaces. Suction and delivery ports in line. The single version is supplied as standard with insulation shells to avoid heat dispersion and/or the formation of condensation on the pump body. For the twin version, the insulation must be carried out by the installer. In any case, care must be taken not to obstruct the condensate drain labyrinths so as not to compromise the functioning of the circulator. The EVOPLUS circulators for small collective systems are connected to the electrical power supply line via a practical connector with relative plug supplied as standard which makes the operation simple and fast. Technopolymer impeller, alumina drive shaft mounted on graphite bushes lubricated by the same pumped liquid. Stainless steel rotor protection jacket. Ceramic thrust ring, ethylene propylene sealing rings and carbon fiber composite stator jacket. Synchronous motor with permanent magnet rotor. For the twin version there is an automatic clapet-type valve incorporated in the delivery port to avoid water recycling in the unit when at rest; Furthermore, a blind flange is supplied as standard in case maintenance of one of the two motors is necessary. The standard execution of the pump body is PN 16, flanged version with 4 slots compatible with PN 6 / PN 10 / PN 16 counterflanges for the interchangeability of the pumps in existing systems.

DOWNLOAD USER MANUAL

GENERAL
Model EVOPLUS 40/180 M
Code 60150938
Wheelbase 180mm
Pump connections 1” ½
Standard union on request 1“ F
Special request nozzle ¾“ F - 1¼“ M
Liquid temperature range from -10°C to +110°C
Operating pressure 16 bar (1600 kPa)
Insulation class F
Circulator protection degree IP 44
European standard compliance EN 61800-3 - EN 60335-1 - EN 60335-2-51
Installation with the motor axis horizontal
Weight 4.5kg
EEI part 2 ≤ 0.20

ELECTRICAL DATA
Phase Single phase
Diet 1x220/240V, 50/60Hz
P1 Max W 68
In A 0.52

HYDRAULIC DATA
Q=m3h 0 2.4 3 4.2 5.4
Q=l/min 0 40 50 70 90
H (m) 4.2 4.2 4 3.1 2.4

Data sheet
Dab
60150938
8059893013620
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included