GEL self-cleaning filter Depura cyclon 550 SP 3/4 cod. 101.158.10

GEL self-cleaning filter Depura cyclon 550 SP 3/4 cod. 101.158.10

Depura Cyclon 550 are manual, self-cleaning safety filters with cyclone washing.

For civil, technical and industrial use, these filters are used when sand or other suspended particles make it inappropriate to install a traditional filter.

Periodic washing with water turbines (cyclone), which can be carried out by turning the lower lever by 90° for 10/15 seconds, keeps the filter cartridge clean.

Depura Cyclon 550 SP: head in polypropylene and connections in brass and vessel in SAN plastic material, resistant to high pressures. Complete with polypropylene filter cartridge with 90"m filtration degree. Adjustable connections.

Depura Cyclon 550 can house the following types of filter cartridges:

• Washable net 5” PP 90"m
• Washable mesh 5” MICRO-STRETCHED 90"μm

They are made with top quality materials, certified for food use (DM 174/2004).

Installation

• Depura Cyclon SP 550 must be installed by qualified personnel, in a dry place protected from frost and sunlight.
• During installation, be careful not to cause knocks so as not to damage the bowl.
• Connect the filter to the pipes using cylindrical thread fittings.
• Install the filter vertically.
• The flow direction must respect the direction of the arrows placed on the filter head.
• Do not install the filter in situations which could generate depressions in the water mains.
• Always provide a by-pass system with valves, check valve sampling taps.
• Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
• In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
• For applications for potable use, after having installed the filter, disinfect the system.
• Screw the jar onto the filter head using the ring nut.

Maintenance

• Periodically wash the filter with water turbines (cyclone) by turning the cleaning tap by 90° for 10-15 seconds.
• Clean the bowl and cartridge using soap and clean, clear potable water.
• Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.