GEL self-cleaning filter Depura cyclon 550 PP 1/2 cod. 101.152.70
GEL self-cleaning filter Depura cyclon 550 PP 1/2 cod. 101.152.70
Manual self-cleaning filters with cyclone washing for 5“ cartridges. WITH IN-LINE ATTACHMENTS AND 90μm MICRO-EXTENDED STAINLESS STEEL CARTRIDGE.
GEL self-cleaning filter Depura cyclon 550 PP 1/2 cod. 101.152.70
Depura Cyclon 550 are manual, self-cleaning safety filters with cyclone washing. For civil, technical and industrial use, these filters are used when sand or other suspended particles make it inappropriate to install a traditional filter.
Periodic washing with water turbines (cyclone), which can be carried out by turning the lower lever by 90° for 10/15 seconds, keeps the filter cartridge clean.
Depura Cyclon 550 PP: head in polypropylene and vessel in SAN plastic material resistant to high pressures.
Complete with micro-stretched stainless steel washable mesh filter cartridge with 90"m filtration degree. In-line connections.
Depura Cyclon 550 can house the following types of filter cartridges:
- Washable net 5” PP 90"m
- Washable mesh 5” MICRO-STRETCHED 90"μm
They are made with top quality materials, certified for food use (DM 174/2004).
Installation
- Depura Cyclon PP 550 must be installed by qualified personnel, in a dry place protected from frost and sunlight.
- During installation, be careful not to cause knocks so as not to damage the bowl.
- Connect the filter to the pipes using cylindrical thread fittings.
- Install the filter vertically.
- The flow direction must respect the direction of the arrows placed on the filter head.
- Do not install the filter in situations which could generate depressions in the water mains.
- Always provide a by-pass system with valves, check valve sampling cocks.
- Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
- In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
- For applications for potable use, after having installed the filter, disinfect the system.
- Screw the jar onto the filter head using the ring nut.
Maintenance
- Periodically wash the filter with water turbines (cyclone) by turning the cleaning tap by 90° for 10-15 seconds.
- Clean the bowl and cartridge using soap and clean, clear potable water.
- Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.
First name | Purifier Cyclon 550 PP 1/2" |
Code | 101.152.70 |
Connection diameter (mm) | 1/2" |
Attack type (F/M) | f |
Nominal pressure (bar) | 10 |
Peak flow rate (m³/h) | 2 |
ΔP (bar) | 0.2 |
H (cm) | 31 |
Use | tec/pot |
temperature min. water (°C) | 5 |
Max water temperature (°C) | 40 |
temperature min. environment (°C) | 5 |
Max ambient temperature (°C) | 50 |
Head material | PP |
Vase material | SAN |
Ø(cm) | 13 |
Unions | NO |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included