GEL self-cleaning filter Depura cyclon baby 3/4 cod. 101.153.10

GEL self-cleaning filter Depura cyclon baby 3/4 cod. 101.153.10

Depura Cyclon Baby are manual, self-cleaning safety filters with cyclone washing and in-line connections.

For civil, technical and industrial use, these filters are used when sand or other suspended particles make it inappropriate to install a traditional filter.

Periodic washing with water turbines (cyclone), which can be carried out by rotating the lower lever by 90° for 10/15 seconds, keeps the filter cartridge clean.

The Depura Cyclon Baby have a brass head and a SAN plastic vessel, resistant to high pressures.

They are complete with washable mesh filter cartridge in micro-stretched stainless steel with a filtration degree of 90 μm.

Ideal in situations of limited space.

Characteristics

Depura Cyclon Baby are manual, self-cleaning safety filters with cyclone washing and in-line connections.

For civil, technical and industrial use, these filters are used when sand or other suspended particles make the installation of a traditional filter inappropriate.

Periodic washing with water turbines (cyclone) keeps the filter cartridge clean.

The Depura Cyclon Baby are made up of a brass head, a SAN plastic vessel and a micro-stretched stainless steel washable mesh filter cartridge with a 90µm filtration degree.

The above equipment is made with top quality materials, certified for food use (DM 174/2004).

Installation

• Depura Cyclon Baby must be installed by qualified personnel, in a dry place protected from frost and sunlight.
• During installation, be careful not to cause knocks so as not to damage the bowl.
• Connect the filter to the pipes using cylindrical thread fittings.
• Install the filter vertically.
• The flow direction must respect the direction of the arrows placed on the filter head.
• Do not install the filter in situations which could generate depressions in the water mains.
• Always provide a by-pass system with valves, check valve sampling taps.
• Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
• In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
• For applications for potable use, after having installed the filter, disinfect the system.
• Screw the jar onto the filter head using the ring nut.

Maintenance

• Periodically wash the filter with water turbines (cyclone) by turning the cleaning tap by 90° for 10-15 seconds.
• Clean the bowl and cartridge using soap and clean, clear potable water.
• Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.