GEL standard safety filter Depura 3000 OT 1 1/2 cod. 101.150.00
GEL standard safety filter Depura 3000 OT 1 1/2 cod. 101.150.00
Depura 3000 are standard safety filters for 10"/3 cartridges which eliminate sand and foreign bodies from the water and are used for civil, technical and industrial uses.
Description
GEL standard safety filter Depura 3000 OT 1 1/2 cod. 101.150.00
Depura 3000 are standard safety filters which eliminate sand and foreign bodies from the water and are used for civil, technical and industrial uses.
They consist of a brass head and a SAN plastic pot, resistant to high pressures.
Depura 3000 can house the following types of filter cartridges:
- Washable mesh 10”/3 PP 90" μm
- Washable mesh 10”/3 INOX 90" μm
- Washable mesh 10”/3 90" μm MICRO-EXPANDED STAINLESS STEEL
- Wound wire 10”/3 PP 20" μm
The above equipment is made with top quality materials, certified for food use (DM 174/2004).
Installation
- Depura 3000 must be installed by qualified personnel, in a dry place protected from frost and sunlight.
- During installation, be careful not to cause knocks so as not to damage the bowl.
- Connect the filter to the pipes using cylindrical thread fittings.
- Install the filter vertically.
- The flow direction must respect the direction of the arrows placed on the filter head.
- Do not install the filter in situations which could generate depressions in the water mains.
- Always provide a by-pass system with valves.
- Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
- In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
- For applications for potable use, after having installed the filter, disinfect the system.
- Screw the jar onto the filter head using the ring nut.
Maintenance
- Clean the filter by washing or replacing the filter cartridge.
- Increase the frequency of washing or replacing the filter cartridge if silt or clay is present.
- Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.
- Clean the bowl and cartridge using soap and clean, clear potable water.
First name | Purify 3000 OT 1 1/2" |
Code | 101.150.00 |
Connection diameter (mm) | 1 1/2" |
Attack type (F/M) | f |
Nominal pressure (bar) | 10 |
ΔP (bar) | 0.2 |
H (cm) | 36 |
Use | tec/pot |
temperature min. water (°C) | 5 |
Max water temperature (°C) | 40 |
temperature min. environment (°C) | 5 |
Max ambient temperature (°C) | 50 |
Head material | Brass |
Vase material | SAN |
Ø(cm) | 16 |
Data sheet
Shipping
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included