Depura 3000 L/OTR 2 standard safety filter GEL cod. 101.143.0L

Depura 3000 L/OTR 2 standard safety filter GEL cod. 101.143.0L

Depura 3000 are standard safety filters which eliminate sand and foreign bodies from the water and are used for civil, technical and industrial uses.

They consist of a brass head and a Trogaid vessel, resistant to high pressures and temperatures.

Depura 3000 can house the following types of filter cartridges:

• Washable mesh 10”/3 PP 90" μm
• Washable mesh 10”/3 INOX 90" μm
• Washable mesh 10”/3 90" μm MICRO-EXPANDED STAINLESS STEEL
• Wound wire 10”/3 PP 20" μm

The above equipment is made with top quality materials, certified for food use (DM 174/2004).

Installation

• Depura 3000 must be installed by qualified personnel, in a dry place protected from frost and sunlight.
• During installation, be careful not to cause knocks so as not to damage the bowl.
• Connect the filter to the pipes using cylindrical thread fittings.
• Install the filter vertically.
• The flow direction must respect the direction of the arrows placed on the filter head.
• Do not install the filter in situations which could generate depressions in the water mains.
• Always provide a by-pass system with valves.
• Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
• In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
• For applications for potable use, after having installed the filter, disinfect the system.
• Screw the jar onto the filter head using the ring nut.

Maintenance

• Clean the filter by washing or replacing the filter cartridge.
• Increase the frequency of washing or replacing the filter cartridge if silt or clay is present.
• Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.
• Clean the bowl and cartridge using soap and clean, clear potable water.