GEL standard safety filter Depura 550 OT 1 cod. 101.125.50

GEL standard safety filter Depura 550 OT 1 cod. 101.125.50

Depura 550 are standard safety filters which eliminate sand and foreign bodies from the water and are used for civil, technical and industrial applications.

Depura 550 filters can house the following types of filter cartridges:

• Washable mesh 5” PP 60" μm
• Washable mesh 5” PP 90" μm
• Washable mesh 5” INOX 90" μm
• Washable mesh 5” MICRO-STREATED STAINLESS STEEL 90" μm
• Wound wire 5” PP 5" μm
• Wound wire 5” PP 20" μm

Characteristics

Depura 550 are standard safety filters which eliminate sand and foreign bodies from the water and are used for civil, technical and industrial applications.

The construction typology is "three-piece" with brass head and SAN plastic pot, resistant to high pressures.

The above equipment is made with top quality materials, certified for food use (DM 174/2004).

Installation

• Depura 550 must be installed by qualified personnel, in a dry place protected from frost and sunlight.
• During installation, be careful not to cause knocks so as not to damage the bowl.
• Connect the filter to the pipes using cylindrical thread fittings.
• Install the filter vertically.
• The flow direction must respect the direction of the arrows placed on the filter head.
• Do not install the filter in situations which could generate depressions in the water mains.
• Always provide a by-pass system with valves.
• Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions.
• In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter.
• For applications for potable use, after having installed the filter, disinfect the system.
• Screw the jar onto the filter head using the ring nut.

Maintenance

• Clean the filter by washing or replacing the filter cartridge.
• Increase the frequency of washing or replacing the filter cartridge if silt or clay is present.
• Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve.
• Clean the bowl and cartridge using soap and clean, clear potable water.