GEL Zerocal+ SENSOR LINE 1/2 cod. 105.079.00

GEL Zerocal+ SENSOR LINE 1/2 cod. 105.079.00

ZeroCal+ dispensers are anti-scale dispensers for boilers and heat exchangers.

The ergonomic shape and adjustable connections make installation quick and easy even in confined spaces.

ZeroCal+ does not require electricity.

The ZeroCal+ dispensers are made of food-grade plastic materials.

The Sensor version is equipped with an acoustic and visual indicator that warns when it is necessary to recharge the liquid anti-limescale product (yellow LED) and when to replace the batteries (red LED).

The package includes a refill of ZeroCal+ DOSE.

The equipment shown above is made with top quality materials, certified for food use (DM 174/2004).

The water used in water systems contains a certain dissolved quantity of calcium and magnesium salts which make it hard.

By heating the water, the hardness gives rise to a chemical reaction with the formation of calcium and magnesium carbonate (limestone) and carbon dioxide.

Calcium carbonate precipitates, giving rise to encrustations on systems and exchangers, while carbon dioxide generates corrosive effects within the system.

It is therefore necessary to treat the water by installing anti-limescale and anti-corrosion equipment such as proportional dispensers.

The dosage of polyphosphate-based products, in proportion to the passage of water (< 5 ppm), does not alter the drinkability characteristics of the water, keeps the elements soluble which would otherwise precipitate forming encrustations and protects from corrosion phenomena.

The very simple installation can be carried out upstream of the water system, of boilers or boilers and upstream of washing machines and dishwashers.

INSTALLATION

• The dispenser can be mounted on horizontal or vertical pipes (in the Sensor version, remove the activation tab before mounting it).

• If you intend to mount the dispenser on vertical pipes, carry out the following operations:

1. Remove the cover

2. Unscrew the 4 screws

3. Remove the impeller cover

4. Rotate the impeller cover

5. Tighten the 4 screws taking care to correctly position the sealing o-ring

6. Replace the crankcase

NB. For details on how to recharge the descaler product, please refer to the relevant use and maintenance manual.