Claber oscillating sprinkler 20 holes cod. 8753
Claber oscillating sprinkler 20 holes cod. 8753
OPERATION EVEN AT LOW PRESSURES
SELECTION OF IRRIGABLE AREAS
JETS SIMILAR TO NATURAL RAIN
AQUA CONTROL REGULATION SYSTEM
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Claber oscillating sprinkler 20 holes cod. 8753
ABS swinging arm with the exclusive “Aqua Control” system which allows you to vary the width of the irrigated surface. 20-hole model with 8 adjustable nozzles (knurled end for comfortable grip). Hydraulic motor with self-lubricating gears in anti-wear acetal resin. Large diameter turbine very efficient even at low pressures. Wet area selection device with practical plug-in positioning (5 different positions). Slide with aluminum elements (Ø 10 mm). Stable on the ground and easy to tow. Maximum irrigated area 320 m².
Oscillating sprinkler suitable for medium or large sized green spaces. It is possible to choose between 5 different wetted areas, for tailor-made and waste-free irrigation.
MATERIALS
Body: ABS
arm: ABS
structure: aluminum
FAST GUIDE
HYDRAULIC CHARACTERISTICS
| BAR | m² | AREA (M) | L/MIN |
|---|---|---|---|
| 1 | 100.0 | 10.5×9.5 | 10.5 |
| 2 | 215.0 | 16.0×13.4 | 15.5 |
| 3 | 305.0 | 18.8×16.2 | 19.0 |
| 4 | 320.0 | 19.2×16.7 | 21.0 |
TECHNICAL FEATURES
Quick entry coupling system: Quick-Click System
Irrigation type: oscillating
Maximum irrigable area: 320 m2
Maximum jet length: 19.2x16.7 m
Pressure (of use): 1 - 4 bar
Irrigation angle: rectangular, square
Flow rate: 15.5 l/min at a pressure of 2 Bar
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included