Fulcron concentrated descaler 1 lt cod. 2565

Fulcron concentrated descaler 1 lt cod. 2565

DESCRIPTION

It thoroughly and effectively removes limescale encrustations, starch, cement residues and veils, saline efflorescence, traces of rust and oxidation from hard washable surfaces.

Its effective and powerful formulation cleans surfaces without damaging metals and rubber seals.

Added with a special functionality indicator capable of changing from red to orange to signal the exhaustion of the descaling power.

Indispensable in many situations that require deep cleaning and treatment.

Thanks to special controlled foam surfactants it is possible to use it in closed circuits powered by pumps (CIP, floor cleaning machines, hydraulic circuits, etc.).

Suitable for HACCP plans

USE

Ideal on ceramic, terracotta, stoneware, glass and steel.

USE

Dilute the product in water from 2% to 20% based on uses and degree of encrustation.

For CIP, floor cleaning machines, hydraulic circuits or in general circuits that require the use of recirculation pumps, operate at least at 45°C.

Prepare the surface to be treated by removing coarse residues of dirt, apply the diluted product and wait a few minutes.

Help yourself with the mechanical action of a sponge or soft brush if necessary.

Do not work with airtight containers as gases are released during the process.

The contact time depends on the amount of encrustation.

Once the operation is finished, rinse thoroughly with water.

On particularly stubborn dirt it is possible to use the product diluted up to 50%.

WARNINGS

Do not use on acid-sensitive surfaces (marble, limestone, etc.).

If in doubt, apply the product to a hidden portion of the surface.

Do not mix with sodium hypochlorite based products.

Data sheet