Ferox primer for aluminum 400 ml cod. 2013

Ferox primer for aluminum 400 ml cod. 2013

DESCRIPTION

Ferox primer - Primer for aluminum is an acrylic resin-based product.

The application of the primer guarantees perfect adhesion of the enamels used to finish the surface, whether nitro or acrylic.

Its resistance to atmospheric agents, together with quick drying, make it ideal for both indoor and outdoor applications.

USE

Ideal for pre-treating aluminum surfaces.

USE

Surface Preparation: Finely sand the surface with P600 paper if necessary.

Then carefully clean the surface to be treated from dust, grease and grease.

Application: shake the can vigorously for at least two minutes.

Spray from a distance of 25 cm. Apply two-three light and crossed coats.

After use, turn the can upside down and spray until only gas comes out to clean the regulator.

Can be overpainted after 2-4 hours.

Any product stains can be removed with acetone and/or nitro thinner.

WARNINGS

Arexons guarantees compatibility between the paints it produces. Before carrying out the work, make sure they are compatible with paints/primers from other manufacturers.

For information on the safety of the product we recommend consulting the Safety Data Sheet.

In case of storage or use in conditions other than those indicated, please contact the company.

STORAGE

At least 3 years if stored in the following conditions: in the original and sealed packaging, away from direct sunlight, in a temperature range between 5°C and 35°C.