Ferox primer for galvanized metals 400 ml cod. 2012
DESCRIPTION
Ferox Primer - primer for galvanized metals is an ideal product for pre-treating galvanized surfaces.
The application of the primer improves the adhesion of the enamels used for finishing the surface.
Its resistance to atmospheric agents, together with quick drying, make it ideal for both indoor and outdoor applications.
Gray and matt in colour, it is suitable for all types of finishes. Self-cleaning valve
USE
Ideal for pre-treating galvanized metal surfaces.
USE
Surface Preparation: Finely sand the surface with P600 paper if necessary.
Then carefully clean the surface to be treated from dust, grease and grease.
Application: shake the can vigorously for at least two minutes.
Spray from a distance of 25 cm. Apply two-three light and crossed coats.
After use, turn the can upside down and spray until only gas comes out to clean the regulator.
Can be overpainted after 2-4 hours.
Any product stains can be removed with acetone and/or nitro thinner.
WARNINGS
Arexons guarantees compatibility between the paints it produces. Before carrying out the work, make sure they are compatible with paints/primers from other manufacturers.
For information on the safety of the product we recommend consulting the Safety Data Sheet.
In case of storage or use in conditions other than those indicated, please contact the company.
STORAGE
At least 3 years if stored in the following conditions: in the original and sealed packaging, away from direct sunlight, in a temperature range between 5°C and 35°C.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included