Ferox wood paint remover 750 ml cod. 2010

Ferox wood paint remover 750 ml cod. 2010

DESCRIPTION

Ferox Verniciatore is a specific product for application on wood, particularly suitable for restoration work, craftsmanship and DIY.

It is also suitable for the nautical sector.

The product, based on organic solvents, is able to easily dissolve all types of enamels and paints, even multi-layered ones.

Formulated in gel, it can also be applied to vertical surfaces.

The product is free from dichloromethane.

USE

DIY treatment with professional results to remove any type of two-component polyurethane, polyester, nitrocellulose, acrylic, epoxy, synthetic and oil-synthetic paint, putty, etc., without bleaching, staining or ruining the wood.

USE

1. Mix the product after opening the container.

2. Apply the paint remover to the product with a thickness of 2 - 3 mm

3. Wait for the product to fully penetrate (see action times)

4. Remove everything with a spatula or a rag.

ACTION TIMES:

• Synthetic paints and water-based enamels: 10-20 minutes

• Polyurethane paints: 30-60 minutes

• Polyester paints: 4-10 hours

WARNINGS

Since wood is a natural and variable support, it is advisable to carry out an application test in a small, inconspicuous area, to avoid possible unwanted effects

Avoid use on plastic materials and application on hot surfaces or surfaces exposed to the sun.

Do not shake before use.

Open the cap with caution as the product could come out violently if under pressure; then cover the mouth with a cloth and pull the opening ring slowly until it vents, always keeping the container away from your face.

Use protective glasses and gloves during application.

STORAGE

In intact packaging and stored at room temperature for at least 3 years