Ferox iron and metal paint remover 750 ml cod. 2009

Ferox iron and metal paint remover 750 ml cod. 2009

DESCRIPTION

Ferox Verniciatore is a product designed to remove all types of enamel and paint from metal surfaces.

The product, based on organic solvents, is able to easily dissolve all types of enamels and paints, even in multiple layers.

The product can also be used with good results on stone and concrete.

Formulated in gel, it can also be applied to vertical surfaces.

Not suitable for bodywork. The product is free from dichloromethane.

USE

DIY treatment with professional results to remove synthetic paints, even multi-layered ones, oil paints, nitrocellulose, acrylic, polyurethane paints, cold enamels, water-based paints and wall plastics, putties, carpet and parquet glues.

USE

1. Mix the product after opening the container.

2. Apply a generous layer of paint remover with a brush or spatula.

3. Wait for the product to fully penetrate (see action times)

4. Remove everything with a spatula or a rag.

ACTION TIMES:

-Synthetic paints and water-based enamels: 10-20 minutes

-Polyurethane paints: 30-60 minutes

WARNINGS

Avoid use on plastic materials and application on hot surfaces or surfaces exposed to the sun.

Do not shake before use.

Open the cap with caution as the product could come out violently if under pressure; then cover the mouth with a cloth and pull the opening ring slowly until it vents, always keeping the container away from your face.

Use protective glasses and gloves during application

STORAGE

In intact packaging and stored at room temperature for at least 3 years