Ferox rust stopper 750 ml cod. 4131

Ferox rust stopper 750 ml cod. 4131

DESCRIPTION

The rust blocker is designed to block the progress of oxidation of metal surfaces.

The product, being transparent and colourless, protects the surface but leaves its color unchanged, whether it is new or rusty.

The product does not alter the surface finish.

Water-based product, it dries quickly and can be used indoors because it is odorless and outdoors because it resists atmospheric agents.

Can be overpainted with solvent-based acrylic spray, solvent-based anti-rust alkyd, water-based acrylic anti-rust.

USE

Treatment of metal surfaces:

• As a Protective: the product blocks rust, acting as a protector and blocking the progress of corrosion while preserving the surfaces.

• As a transparent enamel: Ideal for obtaining the “Corten” effect of visible rust.

• As a Primer: Can be used as a paintable primer.

USE

New iron: degrease the surface very well (check by wetting with water), dry.

Apply two coats of product.

Rusty iron: remove the oxide parts that are not well anchored, sand lightly and remove the dust with a wet cloth.

Leave to dry.

Apply two coats of product.

For very uneven surfaces a third coat may be necessary.

Ready to use product, use brushes or sponge rollers.

After use, soak the brushes in water. Alternatively, use acetone or alcohol to clean the instruments.

WARNINGS

Arexons guarantees compatibility between the paints it produces. Before carrying out the work, make sure they are compatible with paints/primers from other manufacturers.

Do not overlap sheets or items painted with rust stopper.

STORAGE

In intact packaging and stored at room temperature for at least 3 years