DAB lifting station GENIX WL 130 cod. 60185581
zoom_out_map
chevron_left chevron_right

DAB lifting station GENIX WL 130 cod. 60185581

DAB lifting station GENIX WL 130 cod. 60185581

GENIX is the new DAB shredder, designed to provide the highest level of efficiency in the 3 main phases of its life cycle. Indispensable in cases where waste water from toilets, showers, washbasins or bidets cannot be expelled by gravity. These lifting stations can be used anywhere you want to add a toilet when doing new installations, refurbishments or structural changes.

€675.88 VAT included €554.00 (VAT excl.)
VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

DAB lifting station GENIX WL 130 cod. 60185581

Its use is essential in cases where waste water from toilets, showers, sinks or bidets cannot be expelled by gravity.

These lift stations collect and pump wastewater through a small pipe to the nearest gravity drain.

The GENIX WL models are characterized by the connection for the lateral toilet flush, specifically designed for applications with sanitary ware suspended from the wall or when there is not enough space behind the toilet.

In the 130 model, in addition to the toilet, three additional utilities, such as sink, shower and bidet.

The proposed models are characterized by silent operation, further improved in the Comfort versions.

The powerful and reliable pump and the nickel-plated stainless steel grinding device make the product durable and virtually free of routine maintenance.

Extraordinary maintenance in the event of a blockage is extremely easy, with the possibility of accessing the motor unit from the outside without the need to remove the product, guaranteeing clean and problem-free maintenance.

The installation kit is complete with connections adaptable to different pipe diameters with quick coupling and integrated non-return valves.

Available as accessories are an acoustic anti-flooding alarm and an extension adapter tube, to adapt the GENIX to pre-existing installations.

CONSTRUCTION FEATURES OF THE PUMP

Polypropylene tank loaded with 30% barium.

Impeller in PPO 30% glass fibre.

Stainless steel drive shaft.

Nickel-plated stainless steel shredder.

CONSTRUCTION FEATURES OF THE ENGINE

Asynchronous type in stainless steel.

Stainless steel shaft and cap.

Thermal protection against overheating.

Anti-wear crankshaft.

DOWNLOAD USER MANUAL

GENERAL
Model GENIX WL 130
Code 60185581
Liquid temperature range From 0°C to +50°C Waste water as regulated by EN 12050-3.
Circulator protection degree IP 44
Thermal classification of motor insulation B
Capacity Approved for toilets from 6 to 9 liters in accordance with EN12050-3.
Drive automatic
Approval VDE-GS, LGA, VDE-EMC
H max according to EN12050-3 (m) 6
Additional entrances 2 (side) + 1 (up)
DNM mm 22/25/28/32/36/40
Weight 10.3kg

ELECTRICAL DATA
Phase Single phase
Diet 230V 50Hz
In A 2.3
P2 nominal kW 0.32
P2 rated HP 0.44

HYDRAULIC DATA
Q=m3h 0 0.9 1.8 3 4.2 5.4
Q=l/min 0 15 30 50 70 90
H (m) 8 7.5 6.8 5.2 3.5 1

Data sheet
Dab
60185581
8059893172914
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included

You might also like