DAB lifting station GENIX 130 cod. 60161880
DAB lifting station GENIX 130 cod. 60161880
GENIX is the new DAB shredder, designed to provide the highest level of efficiency in the 3 main phases of its life cycle. Indispensable in cases where waste water from toilets, showers, washbasins or bidets cannot be expelled by gravity. These lifting stations can be used anywhere you want to add a toilet when doing new installations, refurbishments or structural changes.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
DAB lifting station GENIX 130 cod. 60161880
Its use is essential in cases where waste water from toilets, showers, sinks or bidets cannot be expelled by gravity.
These lift stations collect and pump wastewater through a small pipe to the nearest gravity drain.
The GENIX models are characterized by the front toilet flush connection.
In the 130 model, in addition to the toilet, three additional utilities, such as sink, shower and bidet.
The proposed models are characterized by silent operation, further improved in the Comfort versions.
The powerful and reliable pump and the nickel-plated stainless steel grinding device make the product durable and virtually free of routine maintenance.
Extraordinary maintenance in the event of a blockage is extremely easy, with the possibility of accessing the motor unit from the outside without the need to remove the product, guaranteeing clean and problem-free maintenance.
The installation kit is complete with connections adaptable to different pipe diameters with quick coupling and integrated non-return valves.
Available as accessories are an acoustic anti-flooding alarm and an extension adapter tube, to adapt the GENIX to pre-existing installations.
CONSTRUCTION FEATURES OF THE PUMP
Polypropylene tank loaded with 30% barium.
Impeller in PPO 30% glass fibre.
Stainless steel drive shaft.
Nickel-plated stainless steel shredder.
CONSTRUCTION FEATURES OF THE ENGINE
Asynchronous type in stainless steel.
Stainless steel shaft and cap.
Thermal protection against overheating.
Anti-wear crankshaft.
| GENERAL | |
|---|---|
| Model | Genix 130 |
| Code | 60161880 |
| Liquid temperature range | From 0°C to +50°C Waste water as regulated by EN 12050-3. |
| Circulator protection degree | IP 44 |
| Thermal classification of motor insulation | B |
| Capacity | Approved for toilets from 6 to 9 liters in accordance with EN12050-3. |
| Drive | automatic |
| Approval | VDE-GS, LGA, VDE-EMC |
| H max according to EN12050-3 (m) | 6 |
| Additional entrances | 2 (side) + 1 (up) |
| DNM mm | 22/25/28/32/36/40 |
| Weight | 10.3kg |
| ELECTRICAL DATA | |
|---|---|
| Phase | Single phase |
| Diet | 230V 50Hz |
| In A | 2.3 |
| P2 rated kW | 0.32 |
| P2 rated HP | 0.44 |
| HYDRAULIC DATA | ||||||
|---|---|---|---|---|---|---|
| Q=m3h | 0 | 0.9 | 1.8 | 3 | 4.2 | 5.4 |
| Q=l/min | 0 | 15 | 30 | 50 | 70 | 90 |
| H (m) | 8 | 7.5 | 6.8 | 5.2 | 3.5 | 1 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included
