DAB Submersible pump FEKA VS 1200 M-NA cod.103040130
DAB Submersible pump FEKA VS 1200 M-NA cod.103040130
Feka VS is a submersible pump entirely in stainless steel ideal for lifting waste water in domestic and residential and civil and commercial environments.
Non-automatic version without float.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
DAB Submersible pump FEKA VS 1200 M-NA code 103040130
Non-automatic version without float.
Submersible centrifugal pumps made of stainless steel with micro-cast steel vortex impeller.
They are suitable for lifting sewage and waste water in general containing solid bodies with a maximum diameter of 50 mm.
The handle is covered in insulating rubber.
The crankshaft is made of AISI 316 stainless steel.
They have a double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side.
Seal cover, motor casing, pump body, cap and handle are made of stainless steel.
They have a dry, asynchronous, watertight motor, cooled by the pumped liquid.
The rotor is mounted on ball bearings greased for life, oversized and selected to guarantee silence and durability.
Thermo-amperometric protection is provided as standard for the single-phase version, while for the three-phase version it is the responsibility of the user.
Permanently inserted capacitor in the single-phase version.
Construction according to CEI 2-3CEI 61-69 (EN 60335-2-41) regulations.
The maximum ambient temperature for using the FEKA VS is +40°C with the engine surfaced.
Continuous service with liquid at 35 °C and totally immersed pump
| GENERAL | |
|---|---|
| Model | FEKA VS 1200 M-NA |
| Code | 103040130 |
| Version | not automatic without float |
| Liquid temperature range | From 0°C to +35°C for domestic use, from +0°C to +50°C for other uses. |
| Pumped liquid | Sewage and used water in general, non-aggressive. |
| Maximum immersion | 7 meters |
| Delivery connection | Threaded 2" GAS |
| Circulator protection degree | IP 68 |
| Thermal classification of motor insulation | F |
| Power cord type | H05RN-F |
| Possible installation types | Fixed or mobile in vertical position |
| Delivery direction | Horizontal |
| Impeller | Vortex in stainless steel |
| Free passage | 50 mm |
| Cable | 10 m H07 |
| Weight | 16.9kg |
| ELECTRICAL DATA | |
|---|---|
| Phase | Single phase |
| Diet | 220-240V 50Hz |
| P1 max kW | 1.93 |
| In A | 8.63 |
| P2 nominal kW | 1.2 |
| P2 rated HP | 1.6 |
| HYDRAULIC DATA | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Q=m3h | 0 | 3 | 6 | 9 | 12 | 15 | 18 | 24 | 30 |
| Q=l/min | 0 | 50 | 100 | 150 | 200 | 250 | 300 | 400 | 500 |
| H (m) | 14 | 13.4 | 12.8 | 12 | 11.2 | 10.1 | 9 | 6.7 | 4 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included