DAB Submersible pump FEKA 300 M NA 40th cod.60195558
DAB Submersible pump FEKA 300 M NA 40th cod.60195558
Feka 300 is a submersible pump suitable for draining and lifting clear or gray waste water and rainwater in domestic and residential areas, moderately loaded water with the presence of solids up to 25 mm, suitable for fixed or mobile installations.
Non-automatic version without float.
DAB Submersible pump FEKA 300 M NA 40th cod.60195558
Non-automatic version without float.
Submersible pumps suitable for draining and lifting clear, gray waste water or rainwater in domestic and residential environments.
They are designed for fixed or mobile installations and are available in automatic versions with integrated float switch or in manual versions without float.
They are suitable for draining flooded basements, cellars and garages or for preventing flooding if installed in rainwater collection pits.
They can also be used as portable pumps in emergency situations to drain water from flooded rooms in the presence of mud, leaves or debris.
The Feka have been redesigned to mark forty years of marketing, making them even more reliable, resistant and ergonomic in use.
The impeller, pump body and suction grille are made of technopolymer, the drive shaft is made of AISI 431 stainless steel and is suitable for slightly salty waters.
Robust and reliable, they have a triple ring seal in an oil bath and a continuous service asynchronous type submersible motor.
Stator housed in an airtight stainless steel casing and rotor mounted on oversized ball bearings.
Impeller cable and nut treated to prevent corrosion.
Thermal protection incorporated in all single-phase versions.
New more efficient and compact engine.
Maximum dry running time: 1 minute.
In compliance with the European standard EN 60335-2-41, a 10 meter power cable is mandatory for the pump in external use.
GENERAL | |
---|---|
Model | FEKA 300 M NA 40th |
Code | 60195558 |
Version | not automatic without float |
Liquid temperature range | From 0°C to +35°C for domestic use. |
Pumped liquid | Clear water, waste water, waste water, rainwater |
Maximum immersion | 7 meters |
Delivery connection | Threaded 1" 1/4 GAS |
Circulator protection degree | IP 68 |
Thermal classification of motor insulation | F |
Power cord type | H05RN-F |
Possible installation types | Fixed or mobile in vertical position |
Delivery direction | Horizontal or vertical |
Impeller | Vortex in technopolymer |
Free passage | 25 mm |
Minimum draft depth | 30 mm |
Cable | 10m H05 |
Weight | 4.6kg |
ELECTRICAL DATA | |
---|---|
Phase | Single phase |
Diet | 230V 50Hz |
P1 max kW | 0.35 |
In A | 1.9 |
P2 nominal kW | 0.22 |
P2 rated HP | 0.30 |
HYDRAULIC DATA | |||||
---|---|---|---|---|---|
Q=m3h | 0 | 3 | 6 | 9 | 12 |
Q=l/min | 0 | 50 | 100 | 150 | 200 |
H (m) | 6.4 | 5.5 | 4.4 | 3.1 | 1.6 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included