Grundfos three-phase vertical centrifugal pump CR 1S-6 A cod. 96515553
zoom_out_map
chevron_left chevron_right
-49%

Grundfos three-phase vertical centrifugal pump CR 1S-6 A cod. 96515553

Grundfos three-phase vertical centrifugal pump CR 1S-6 A cod. 96515553

Vertical multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are made of cast iron. All other parts in contact with liquids are in stainless steel (EN 1.4301).

€694.11 VAT included €1,361.00 -49% €568.94 (VAT excl.)

Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos three-phase vertical centrifugal pump CR 1S-6 A cod. 96515553

Model: CR 1S-6 AAAE-HQQE

Vertical centrifugal pump, multi-stage with suction and delivery ports on the same level (in line).

The pump head and base are made of cast iron - all other parts in contact with the liquid are made of stainless steel.

Power transmission occurs via rigid coupling.

The pump is equipped with a 3-phase asynchronous motor, air-cooled, mounted on support feet.

Useful to:

  • Air Conditioning - Commercial Buildings
  • Heating in commercial buildings
  • Pressure increase - Commercial buildings
  • District cooling
  • District heating
  • Drinking water treatment
  • Irrigation
  • Cooling down
  • Desalination
  • Industrial heating
  • Processing
  • Process liquid transfer
  • Industrial process water treatment
  • Washing and cleaning
  • Industrial water supply
  • Industrial wastewater
  • Solar plumbing solutions
  • Capture of surface water
  • Community water supply
  • Water distribution

TECHNIQUES
Pump speed on which the data is based 2873 rpm
Nominal flow rate 0.9 m³/h
Prevalence 24.9 m
Max. head 35.9 m
Stadiums 6
Impellers 6
No. of impellers with reduced diameter 0
Low NPSH No
Pump orientation Vertical
Shaft sealing system Single
Code for shaft seal HHQE
Approvals CE, EAC, UKCA, SEPRO
Drinking water approvals WRAS, ACS
Curve tolerance ISO9906:2012 3B
Pump version TO
Model TO

MATERIALS
Body Pump Cast iron, EN1561 EN-GJL-200 ASM A48-25B
Impeller Stainless steel, EN 1.4301, AISI 304
Material code TO
Code for rubber AND
Bearing SIC

INSTALLATION
Max ambient temperature 60°C
Max operating pressure 16 bars
Max pressure at the mentioned temperature 16 bar / 120°C - 16 bar / -20°C
Connection type Oval / Rep
Size of the inlet connection 1 inch
Output connection size 1 inch
Nominal pressure of the connection PN 16
Flange dimensions for the motor FT85
Pump connection code TO

LIQUID
Pumped liquid Waterfall
Liquid temperature range -20 .. 120°C
Liquid temperature during operation 20°C
Density 998.2 kg/m³

ELECTRICAL DATA
Standard engine IEC
Structure dimensions 71A
IE efficiency code IE3
Rated power - P2 0.37 kW
Power (P2) required by the pump 0.37 kW
Network frequency 50Hz
Nominal tension 3 x 220-240D/380-415Y V
Rated current 1.74/1.00 A
Starting current 490-530%
Cos phi - power factor 0.80-0.70
Nominal speed 2850-2880 rpm
Efficiency IE1 73.8%
Engine efficiency at full load 73.8%
Engine efficiency at 3/4 load 79.0%
Motor efficiency at 1/2 load 75.5%
No. of poles 2
Protection class (IEC 34-5) 55 Dust/Jetting
Insulation class (IEC 85) F
Integrated motor protection NOBODY
Engine code 85805102

OTHER
Frequency converter IT IS NOT
Terminal block position 6
Minimum efficiency index, MEI ≥ 0.54
Net weight 19.7kg
Gross weight 22.3kg
Packaging volume 0.054 m³
Danish VVS no 385900506
Nation of origin HU
Agreement rate no. 84137075
Data sheet
GRUNDFOS
96515553
5700396727448
Curves
file_1681462144.5292.png
Drawings
file_1681462149.3255.png
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included